Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle
Well like it says in the topic title.....Thanks for everything fellas....I'm leaving the Honda FI world and let alone the Honda world.....My car got jacked last night in LA ..... and well....the game is completely over ...... I guess more then the car my friggin TE37's are the biggest loss....they cost half as much as my Blue Book value of my car.....OUCH!
RIP 1997 Acura Integra Sedan GS...
I have tons of parts that people might love to pick up....it's almost complete besides the Turbo....but from oil feed/return straight to my exhaust system....it's complete....I also have up for grabs the Fuel management setup I was going to try...the Profec E-01 + E-Manage + DSM 450cc's right out of a working DSM 2G from RRE + OBD1 Clips and Resistor Pack...if anybody wants to try this setup you have everything you need.....god I was sooo close to finishing this....now onto the EVO or base model 350z! for shizzle.
I will post all images and post all prices....I'll provide the FI classified link back here later today
Modified by mamaboy at 7:53 PM 4/21/2003
RIP 1997 Acura Integra Sedan GS...
I have tons of parts that people might love to pick up....it's almost complete besides the Turbo....but from oil feed/return straight to my exhaust system....it's complete....I also have up for grabs the Fuel management setup I was going to try...the Profec E-01 + E-Manage + DSM 450cc's right out of a working DSM 2G from RRE + OBD1 Clips and Resistor Pack...if anybody wants to try this setup you have everything you need.....god I was sooo close to finishing this....now onto the EVO or base model 350z! for shizzle.
I will post all images and post all prices....I'll provide the FI classified link back here later today
Modified by mamaboy at 7:53 PM 4/21/2003
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
I'll list the parts I have if anybody is interested. All items were never used! I would like to let everybody know that I am wanting to part out the parts as packages as listed below
Turbo Hardware
1. InlinePro Cast SS T3 Manifold
2. Tial 35mm Wastegate
3. Oil Feed/Return Line...all necessary hardware/all SS lines
>>>>All you need is the Turbo (cheapturbo.com gets you a T3/T04e 57Trim .48A/R Turbine / .63 A/R Compressor w/5bolt Turbine configuration for $599...that what I was about to buy)
Intercooler Hardware
1. PWR 18x6x3 intercooler/Painted Flat Black
https://honda-tech.com/zero...age=1
2. 1G DSM BOV
>>>>Just need the Intercooler Plumbing....2.25" in/out
Exhaust Hardware
1. SS 2.5" Mandrel Bend Exhaust
2. RevHard 2.5" Downpipe
>>>>Just need the Flexpipe, Cat, and Muffler....That's fairly cheap
Fuel Setup
1. Greddy Profec E-01
2. Greddy E-Manage Main Unit (No sensors)
3. 2G DSM 450cc Injectors (4)
4. OBD1 Clips + Resistor Pack
>>>>Just need a Walbro 255lph Intank
Electronics
1. Greddy Turbo Timer (Black)
2. Greddy ElectronicWarning E.G.T. Gauge 60mm
3. Greddy Electronic Warning Boost Gauge 60mm
4. Greddy Electronic Fuel Pressure Gauge 60mm
5. (2) HKS 60mm Gauge Holder
6. Greddy 60mm Gauge Holder
7. RRE Dual 60mm Gauge Holder Pod (Black Fiberglass)
>>>>COMPLETE!
I will have all prices and pictures up by at least 5:00pm PST
PM if your interested in any of the parts....and I'll give you the prices.
All pics/prices will be listed on the FI Classified forum
Modified by mamaboy at 9:33 PM 4/21/2003
Modified by mamaboy at 10:23 PM 4/21/2003
Modified by mamaboy at 10:55 PM 4/21/2003
Turbo Hardware
1. InlinePro Cast SS T3 Manifold
2. Tial 35mm Wastegate
3. Oil Feed/Return Line...all necessary hardware/all SS lines
>>>>All you need is the Turbo (cheapturbo.com gets you a T3/T04e 57Trim .48A/R Turbine / .63 A/R Compressor w/5bolt Turbine configuration for $599...that what I was about to buy)
Intercooler Hardware
1. PWR 18x6x3 intercooler/Painted Flat Black
https://honda-tech.com/zero...age=1
2. 1G DSM BOV
>>>>Just need the Intercooler Plumbing....2.25" in/out
Exhaust Hardware
1. SS 2.5" Mandrel Bend Exhaust
2. RevHard 2.5" Downpipe
>>>>Just need the Flexpipe, Cat, and Muffler....That's fairly cheap
Fuel Setup
1. Greddy Profec E-01
2. Greddy E-Manage Main Unit (No sensors)
3. 2G DSM 450cc Injectors (4)
4. OBD1 Clips + Resistor Pack
>>>>Just need a Walbro 255lph Intank
Electronics
1. Greddy Turbo Timer (Black)
2. Greddy ElectronicWarning E.G.T. Gauge 60mm
3. Greddy Electronic Warning Boost Gauge 60mm
4. Greddy Electronic Fuel Pressure Gauge 60mm
5. (2) HKS 60mm Gauge Holder
6. Greddy 60mm Gauge Holder
7. RRE Dual 60mm Gauge Holder Pod (Black Fiberglass)
>>>>COMPLETE!
I will have all prices and pictures up by at least 5:00pm PST
PM if your interested in any of the parts....and I'll give you the prices.
All pics/prices will be listed on the FI Classified forum
Modified by mamaboy at 9:33 PM 4/21/2003
Modified by mamaboy at 10:23 PM 4/21/2003
Modified by mamaboy at 10:55 PM 4/21/2003
Trending Topics
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
Fellas the pictures are up i'm double checking them now...No prices now i'm going to figure them out in a sec....here's the link
https://honda-tech.com/zerothread?id=482571
https://honda-tech.com/zerothread?id=482571
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
Updated with all prices https://honda-tech.com/zerothread?id=482571
Honda-Tech Member
Joined: Feb 2002
Posts: 9,455
Likes: 3
From: I heart tool, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
I have to give my condolances on the lost teg, but I'm sure the new vehicle will be even better.
I would go with the 350Z. I ******* love that car. Buy it, and save for a turbo setup...
I would go with the 350Z. I ******* love that car. Buy it, and save for a turbo setup...
Honda-Tech Member
Joined: Feb 2001
Posts: 6,351
Likes: 0
From: Tejas
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
well, good luck to you Johnny, just remember, I still be able to spank your TT 300Z... hehehehe, JK..
stan
stan
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (Flamenco-T)
hahahhaa....we'll see i'm really contemplating the 350Z (Twin turbo ??? or single turbo??? I don't know what Greddy offers haven't updated my inventory) setup with the volks weighing in at an incredible 15lbs with some BFGoodrich drag radials
Modified by mamaboy at 6:52 PM 4/22/2003
Modified by mamaboy at 6:52 PM 4/22/2003
Thread Starter
Member
Joined: Oct 2001
Posts: 2,022
Likes: 1
From: CA, US
Re: Thanks for everything fellas...Leaving the Honda FI World....Stolen Vehicle (mamaboy)
Well the car was found today.....in South Central L.A......everything stripped....the police officer and I kinda chuckled.....but anyways.....I'll have all the pictures of this incident on tomorrow....BLAH!