question(s) for boosted Y8 owners out there..
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 1,748
Likes: 1
From: Cincinnati, Ohio
question(s) for boosted Y8 owners out there..
I'm getting ready to put together a DIY turbo kit for my Y8 and I concerned because I'm worried about the strength of my bottom end. I've asked around (and searched 
) and I'm getting vague answers anywhere from 170-200 whp.. oh yeah and this is gonna be w/o standalone, but with proper fuel upgrades, IC, and vafc. So before I decide on a turbo I wanna know what I can realistically push w/o standalone. Thanks
) and I'm getting vague answers anywhere from 170-200 whp.. oh yeah and this is gonna be w/o standalone, but with proper fuel upgrades, IC, and vafc. So before I decide on a turbo I wanna know what I can realistically push w/o standalone. Thanks
Member
Joined: Jul 2002
Posts: 2,234
Likes: 0
From: the OC, Ca
Re: question(s) for boosted Y8 owners out there.. (IDriveAHonda)
with an afc and 440 injectors, u can push 10 psi. that will give u about 180-190 whp i believe. look up afc hack on the search option or go to thedropshop.com, its under tech. but if i were u i would seriously consider hondata...just my opinion
oh, and u should check this site>> http://turbod16.no-ip.com they can help u out there
rage
oh, and u should check this site>> http://turbod16.no-ip.com they can help u out there
rage
Member
Joined: Mar 2002
Posts: 1,703
Likes: 1
From: Somewhere in, USA
Re: question(s) for boosted Y8 owners out there.. (IDriveAHonda)
<-- VAFC and 12+ lbs. many many many of us are running up to 12 lbs daily. 
if you have any ?'s drop me a PM i ran the same set-up you're planning on.
if you have any ?'s drop me a PM i ran the same set-up you're planning on.
Honda-Tech Member
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Re: question(s) for boosted Y8 owners out there.. (IDriveAHonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IDriveAHonda »</TD></TR><TR><TD CLASS="quote">I'm getting ready to put together a DIY turbo kit for my Y8 and I concerned because I'm worried about the strength of my bottom end. I've asked around (and searched ) and I'm getting vague answers anywhere from 170-200 whp.. oh yeah and this is gonna be w/o standalone, but with proper fuel upgrades, IC, and vafc. So before I decide on a turbo I wanna know what I can realistically push w/o standalone. Thanks</TD></TR></TABLE>
well i think most people will say that d16 rods start snappin at like 250+whp... there are a few who have outdone that though... ::cough:: BoostedED9 ::cough:: Liam821 ::cough::::cough:: hehe. Depending on turbo size and tuning it's possible to make 200whp @ decent amount of boost... I made 194whp @ 8-8.5psi on a T3 60 trim semi-tuned. I think Hatchblack made 208whp @ 8psi on a t3/t04b. I was running the afc hack with intank pump and the 450cc injectors. don't quite remember what hatchblack was running. PERSONALLY... my limits without a standalone (limit of my setup as well) is like 10psi.
) and I'm getting vague answers anywhere from 170-200 whp.. oh yeah and this is gonna be w/o standalone, but with proper fuel upgrades, IC, and vafc. So before I decide on a turbo I wanna know what I can realistically push w/o standalone. Thanks</TD></TR></TABLE>well i think most people will say that d16 rods start snappin at like 250+whp... there are a few who have outdone that though... ::cough:: BoostedED9 ::cough:: Liam821 ::cough::::cough:: hehe. Depending on turbo size and tuning it's possible to make 200whp @ decent amount of boost... I made 194whp @ 8-8.5psi on a T3 60 trim semi-tuned. I think Hatchblack made 208whp @ 8psi on a t3/t04b. I was running the afc hack with intank pump and the 450cc injectors. don't quite remember what hatchblack was running. PERSONALLY... my limits without a standalone (limit of my setup as well) is like 10psi.
Thread
Thread Starter
Forum
Replies
Last Post
