What would you do? (wiring)
Thread Starter
Joined: Apr 2003
Posts: 10
Likes: 0
From: Delta B.C
For those who have swapped a B18A/B in a EK
I have a 98 hatch with a 99 b16a2. The car was wired from obd2 to obd2.5 when I did the swap. I later on got a obd2.5 to obd1 converter and ran a mugun chiped p28. The car runs mint.
Now I will swapping out the 99 b16 for a 95 b18b with a custom chipped obd1 ecu.
What are my wiring options, complete wiring change over, conveter or use the 99 b16 wiring?
I will be building the 18b for boost so I want to keep it obd1.
[Modified by blackjdm, 12:24 AM 4/7/2003]
Now I will swapping out the 99 b16 for a 95 b18b with a custom chipped obd1 ecu.
What are my wiring options, complete wiring change over, conveter or use the 99 b16 wiring?
I will be building the 18b for boost so I want to keep it obd1.
[Modified by blackjdm, 12:24 AM 4/7/2003]
Honda-Tech Member
Joined: Sep 2001
Posts: 12,176
Likes: 2
From: Tucson, AZ
Re: For those who have swapped a B18A/B in a EK (blackjdm)
DUDE what the ****
dont bump your post every minuet
god damn newbie
this is why you get 5 posts per day because of stupid **** like that.
get a OBDI engine and under dash harness and just ditch the OBD conversion crap
dont bump your post every minuet
god damn newbie
this is why you get 5 posts per day because of stupid **** like that.
get a OBDI engine and under dash harness and just ditch the OBD conversion crap
Thread
Thread Starter
Forum
Replies
Last Post