So I ordered the 16040749 3-bar from GMpartsdirect.com...I got my sensor...and the p/n is 12223861....i wrote to them to ask what happened to the 160's and they said:


GM no longer produces that sensor under that part number. The 16040749 has been replaced by the 12223861.



Thank you, GMPartsDirect.com


so now my question is, is anyone using the 1222 with no problems? Or should I just return it anyway and try to find a 160 sensor?

 

i just ordered the same thing today. I hope it works the same.

 

yah i mean it looks the same as the pics of the older one...

but then again I was reading on searches that some people we having problems with all 3 bars except the 160... + hondata

 

should have ordered a msd 3 bar map and its even cheaper and summit sells it

 

really, i haven't read anything yet. I'll talk to my guy that is doing the hondata and see if he knows anything.

 

by like a dollar. Do you run it? if so, how is it doing?

 

yep i have it and works good only paid like 55bucks for with out pigtail from summit its on my car now with hondata

 

good deal, well if the new GM doesn't work, i'll get the msd

 

you got yours to work with hondata? I couldn't. what gives?

 

i seen you said that in one of your post but i tried it anyhow and its works you must didn't have it hooked up right

 

I might be able to get you guys a hookup on the MSD one. Send me an email if you are sure you want one and what the best price is you've seen so far so I can talk to some suppliers.

chris@stupidfast.com

 

How does $46 shipped via 1st class sound? That's just a couple bucks over cost. I was told that they might not be available even though Summit had them listed on their site but once we get enough interest we'll finalize things. Need 5 or more people for this deal.

Remember, this is the hook up, I'm making enough to pay for bubble envelopes, shipping, and a little gas on this deal.

 

i'm down if the new GM part numbered map sensor doesn't work.

 

No one wants to use the Calveco sensor? 3.5bar map sensor is superior to the GM 3 bar.

 

ahh so many choices

i just went w/ the GM since everyone seems to be using it, and since Hondata mentions it on their site

All i wanted was the right part numbered sensor so i can boost more

damn gm parts direct.

autoex, when do u plan on trying it out? i think I'm going to try this weekend

 

If your using hondata, it only supports the 3bar map sensor. Using the 3.5 bar map sensor will cause your maps to go all wacky.

 

Can I get a show of hands of people running 27-29 psi, and wanting to run more?

Sorry, bro, just busting your onions If this Calveco sensor is affordably priced, I don't see any real reason not to run it.

 

I'm interested! put me down!

 

Damn I just ordered one from gmpartsdirect, that and a boost control solonoid and pigtails for both. I wasnt notified by them about any changes so far, so I will keep my fingers crossed.
I was contemplating the MSD one also, but Ive heard some bad things about them...so Im staying away for now.

 

That's what my guys told me, alot of the newer MSD products had problems (including their injectors, cough cough) so a bunch of stuff was recalled and the replacements might not be available yet.

I told them I wasn't going to be making money on these so I don't want to sell them if I'm going to have to return them all when they crap out

 

a little OT but related to the 3 bar map sensor...

i was looking at the 3 bar map install on hondata's websight but my map sensor voltage seems a little different

1st wire is 5.2 volts, 2nd wire is 4.8, and the 3rd is .3 volts

so the 4.8volts would be the map signal right?


[Modified by accordfreak, 7:35 AM 4/2/2003]

 

installed and tuned today, works perfect




Modified by DoriDoriboii at 8:35 AM 5/6/2003

 

So... which ones work and which ones don't? Any sugestions as to where the best (i.e. cheapest) place I can get a working one would be?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by servion &raquo;</TD></TR><TR><TD CLASS="quote">So... which ones work and which ones don't? Any sugestions as to where the best (i.e. cheapest) place I can get a working one would be? </TD></TR></TABLE>

i'd like to know too...