EVERYTHING IS GONE!!!


Stop emailing me!!!!


Modified by garth at 12:55 PM 7/12/2003

 

ttt x1

 

Could you take one of the layers off the mugen headgasket? Im looking for a one layer one..

 

Mugen only makes a two layer gasket!!!

 

Ah thats weak.. Would you happen to know where I could get a one layer gasket?!

 

hey do u know the actual size of the head gasket it

 

bump for you!

 

You can make a single layer gasket out of a stock one...

Headgasket is .47mm. For more specs on the headgasket check:

http://www.kingmotorsports.com/categ...ategory=Engine

 

ttt (x2)

 

Do you have the dyno chart from teh ventuli plate?

 

take the stock one and rip it apart...gently

 

Thanks for the interest... I don't have the dyno chart for it, however on a B18C5 it made between 4-7hp in the midrange. There was no reduction in hp on the top end. This was with a completely stock motor. Only cam gears, FPR and Fields vtec controller.

 

ttt (x3)

 

Why did you decide to remove it after only one dyno then?

 

It was installed on a friends car. I took it out because I was going to put it in mine...

 

ttt (x4)

for the evening folks!!!

 

ttt (x5)

Anyone... anyone... anyone????

 

will this fit on a b-16 bore to a 84.mm

 

I don't know what exactly you are referring to.. but let me explain a bit more... please look in the 1st post!!!

 

ttt (x5)

 

ttt (x6)

 

ttt (x7)

 

i need the whole front left side suspension....... lower control arms trailing arms everything u can think of ... if u can hook me up for a good price pm or e-mail me at eljdm69@aol.com thanx man

 

you got email...

 

ttt (x7) "evening bump"