Here is the deal. Theses sessions are not as much to do it for everyone as it is to teach others to do it themselves. Feel free to bring video and digital cameras so you can have reference material.

We already have a Clutch/Flywheel/FD Volunteer so we are not looking for more.

We are looking for people who would have an Intake, Header or Exhaust to install. We will only do one piece per car.

We will be doing brake work sessions throughout the day both days. We have reserved times to help drivers who have problems or those who have planned ahead to change pads at the track.

We will also be doing a valve adjustment session for people to learn from and a Cam install.

A schedule will be posted once we finalize things in the next couple of days.

Trey

 

Sounds good. Who will be doing the above? I will make sure to take plenty of pics/notes. I'll need them for the future.

Jason-
who, if he had some form of memory, should remember this process as many times as he has seen it.

 

I'm a little work ant....short and stout.

Count me in to help with walking people through procedures and help with others.

Volunteer effort:
I'll put some new wiper blade inserts on my car. They can be pretty tricky sometimes. *snicker*

 

I'll install light-up nozzle tips in assdime's roof.

 

I have a Spoon LSD I can bring if anyone wants to tackle that install in my car

 

We'll do that right after the B's

Is there going to by a dyno to tune on? Or do I have to rely on Jacks abilities to program a vafc with no dyno?

 

You say that like it's a bad thing

Third-gear highway pulls tune all

 

Hmm, I can help out with any of the following... as long as there is some good food & beer.

I/H/C/E, brake pads, f/r sway bars, shocks, springs, valve adjustment, coolant, oil, tranny oil, brake fluid, and gutting the interior.

 

and after he's done, I can help out with testing to make sure they perform. No charge for the test drive.

 

I'll have a new Carsound cat to install right about then.. any need for that as part of the I/H/E demos?

 

This REALLY makes me wish I were going to the expo.

 

-_- evil squinty eyes at IO_burn


[Modified by EVIL CETANE, 8:25 AM 3/12/2003]

 

i volunteer to install a b18c5 engine into my civic......but that will mean one will disappear from one of the 120 ITR that will be on display....

 

Not that I have been known to make people dissapper or anything.

 

Chad, you take my tanker motor and I'll take your B20 y0

 

i have an ignition system sitting here i am waiting to install. if need be i can hang on to it till the expo and do it there.
i am just goign to be doing it on the fly anyway so if there is somebody that knows what they are doing they can glady use my cars a a show tools.
the kid includes msd 6al ignition, msd cap, masd blaster ss coil, and msd wires.
also goa jacobs nitrous mastermind to install as well.

 

if i get to keep my valve train then i would swap!!!! 198 and 148 to the wheels....hmmmm

 

I aint doin ****.

 

PSSSSSSHHHHHHHHHHHHHHH....Aerobed 0 Screwdriver 1

 

lmfao....

daves sleeved shirts taken to expo = 4 . sleeves upon return home = 0

 

Come on Dave, I thought your NC boys were up for a diff install.

Beer is on me for anyone who wants to lend a hand.

 

Muthafucka!

 

"Do not stand on the aerobed!" ----> D