A little mini-me help
I have a 2000 civic dx (with a d16y7) and I am getting a 92-95 si motor (sohc vtec) I think its a d16z6 but I am not sure. I am getting the motor for next to nothing and I am wondering if it would be compatable for me to swap some things over like.
A. The intake manifold
B. The vtec head
Now I am sure that when swaping the head I will swap over the manifold and everything else, which is fine because I have the complete motor and tranny and even an aem cam gear. I am just wanting a temporary setup while I save for a swap, plus I absolutely hate the intake manifold currently on my car.
If anyone could give me a little help on this that would be greatly appreciated, I did search for this but I really didn't see anything about what I was looking for.
A. The intake manifold
B. The vtec head
Now I am sure that when swaping the head I will swap over the manifold and everything else, which is fine because I have the complete motor and tranny and even an aem cam gear. I am just wanting a temporary setup while I save for a swap, plus I absolutely hate the intake manifold currently on my car.
If anyone could give me a little help on this that would be greatly appreciated, I did search for this but I really didn't see anything about what I was looking for.
you may want to search and/or ask around on this board:
http://pub143.ezboard.com/bhondadseries
i think there may be a problem since your car is odbII and the motor is odbI. you may have to do a lot of engine harness wiring work to pull it off, but i really am not sure. as for a mini-me, i've been told the intake manifold from the d16y8 is better in terms of flow. again, wiring may be a pain if trying to use the z6 im.
here's a link about the theory of the mini-me swap:
http://crx.honda-perf.org/articles/m...oreminime.html
and a great link about installing the y8 im on a y7 motor that might give you an idea how the d16z6 im install might go onto a y7:
http://www.makuragi.s5.com/civic_99/Y8maniswap/
other mini-me links:
http://www.iapecc.com/mini_me.htm
http://crx.honda-perf.org/articles/z6swap/z6swap.html
i hope that helped...
http://pub143.ezboard.com/bhondadseries
i think there may be a problem since your car is odbII and the motor is odbI. you may have to do a lot of engine harness wiring work to pull it off, but i really am not sure. as for a mini-me, i've been told the intake manifold from the d16y8 is better in terms of flow. again, wiring may be a pain if trying to use the z6 im.
here's a link about the theory of the mini-me swap:
http://crx.honda-perf.org/articles/m...oreminime.html
and a great link about installing the y8 im on a y7 motor that might give you an idea how the d16z6 im install might go onto a y7:
http://www.makuragi.s5.com/civic_99/Y8maniswap/
other mini-me links:
http://www.iapecc.com/mini_me.htm
http://crx.honda-perf.org/articles/z6swap/z6swap.html
i hope that helped...
Well this message board will help you out with doing this kinda of swap http://dseries.org/
Yeah thats a really good board with good information, I just thought I would post it here since this is more my "home" than anywhere else. Also I thought I would break the cycle of "look at my car" or "what colors did 92-95 civics come in".
Thanks for the help so far though.
keep it coming.
Thanks for the help so far though.
keep it coming.
Thread
Thread Starter
Forum
Replies
Last Post
Xxcivic97xX
Honda Civic / Del Sol (1992 - 2000)
8
May 4, 2025 10:44 AM
tmacb78
Honda CRX / EF Civic (1988 - 1991)
3
Mar 31, 2004 02:49 PM
VTECVillain
Honda CRX / EF Civic (1988 - 1991)
7
Jun 19, 2002 02:25 PM



