I will entertain any kind of offer brought forth to me on ANY part!

All parts are new, never used and straight from the dealer. (Except for a few, which are indicated)

Tial Wastegate 35mm HP with a .45 Bar Spring --- $210.00 - SOLD
http://www.imagestation.com/picture/...6/fc92da57.jpg

OBD2 Injectors Resistor Box Kit w/Instructions -- $40
http://www.imagestation.com/picture/...7/fc92da64.jpg

AEM Adjustable Fuel Pressure Regulator 25-301C -- $150.00 Reduced $40
http://www.imagestation.com/picture/...7/fc92da6e.jpg
http://www.imagestation.com/picture/...b/fc92da6a.jpg

AEM High Volume Fuel Filter 25-200C -- $100.00 Reduced $20
http://www.imagestation.com/picture/...a/fc92da75.jpg
http://www.imagestation.com/picture/...c/fc92da79.jpg

AEM Fuel Rail 25-109C -- $125.00 Reduced $30
http://www.imagestation.com/picture/...0/fc92da7e.jpg
http://www.imagestation.com/picture/...4/fc92da7c.jpg

Greddy Type-S BOV #11501650 -- $175.00 - SOLD
http://www.imagestation.com/picture/...e/fc92da6c.jpg

Apexi Universal Air Filter (great for turbo) -- $70.00
http://www.imagestation.com/picture/...5/fc92da66.jpg

ARP D16 Head Studs -- $94.00 -- SOLD
http://www.imagestation.com/picture/...c/fc92da54.jpg

Walbro 255lph HP GSS342 Fuel Pump -- $99.00
http://www.imagestation.com/picture/...1/fc92da40.jpg

Greddy Profec-B Boost Controller -- $295.00
http://www.imagestation.com/picture/...2/fc92da77.jpg
http://www.imagestation.com/picture/...d/fc92da72.jpg

Garrett T3/T04E .63 A/R Turbine Housing. Stage III Turbine
.60 A/R Compressor Housing. 60 Trim Compressor Wheel -- $545.00 SOLD FOR CHEAPER THAN LISTED
http://www.imagestation.com/picture/...7/fc92da50.jpg
http://www.imagestation.com/picture/...e/fc92da4e.jpg
http://www.imagestation.com/picture/...e/fc92da4c.jpg
http://www.imagestation.com/picture/...5/fc92da48.jpg

Cometic Headgasket 75.5MM .057 MLS (custom made for Ross Pistons) -- $80.00
http://www.imagestation.com/picture/...7/fc92da4d.jpg
http://www.imagestation.com/picture/...c/fc92da4a.jpg

Ross Racing Pistons 75.5MM 8.8:1 C/R -- $455.00
http://www.imagestation.com/picture/...8/fc92da5d.jpg
http://www.imagestation.com/picture/...a/fc92da5b.jpg

Eagle H-Beam Connecting Rods for D16 -- $325.00
http://www.imagestation.com/picture/...9/fc92da42.jpg
http://www.imagestation.com/picture/...b/fc92da3f.jpg

ACL Bearings for D16 and ZC -- $100.00 SOLD
http://www.imagestation.com/picture/...7/fc92da81.jpg

Apexi V-AFC (used, but in great condition..used for 5 months) -- $270.00 Reduced $10
http://www.imagestation.com/picture/...7/fc92da62.jpg
http://www.imagestation.com/picture/...2/fc92da5e.jpg
http://www.imagestation.com/picture/...9/fc92da55.jpg

DOHC Valve Cover from GSR (good for polishing) -- $88.00
http://www.imagestation.com/picture/...4/fc92da44.jpg

DOHC Valve Cover from B18B1 (good for polishing) -- $78.00http://www.imagestation.com/picture/...1/fc92da4f.jpg

SOHC Valve Cover from D16 (good for polishing) -- $68.00
http://www.imagestation.com/picture/...b/fc92da5a.jpg

Autometer #4375 Ultra-Lite Air/Fuel Ratio Gauge 2" (used but in great condition) -- $35.00 -- SOLD
http://www.imagestation.com/picture/...9/fc92da52.jpg

Autometer Dual Instrument Cluster Bezel for Civic 94-00 (used but in great condition) -- $60.00 -- SOLD
http://www.imagestation.com/picture/...8/fc92da51.jpg

Honda D16Y8 Head and Block -- $280.00 GET THIS PILE OUT OF HERE. LOL. MAKE AN OFFER
The block is completely ripped apart and was set aside to get sent to Golden Eagle for sleeving. The head is intact. I have all parts/nuts/bolts from the whole tear-down process labeled in ziploc bags. No pictures because there are too many parts. The only parts not salvagable were the pistons, rings, and connecting rods. The head would need refinishing. Valves are burnt. Upon request, I will take individual pictures of any part.

....

Bryan -- turbo98ex@yahoo.com


[Modified by mntdewred, 12:25 AM 4/1/2003]


[Modified by mntdewred, 12:27 PM 4/5/2003]

 

hey sup u got im for the Autometer Dual Instrument Cluster Bezel for Civic 94-00 (used but in great condition)

 

PM'd you.

-Ryan

 

pm'd you both

 

WOW...lots of good stuff at new or higher prices.

 

parts are new and are decreased in price from what i bought them at. if you have a problem with the prices, then pm me.

 

hey wats your aim sn. and tell me when u send the stuff.

 

sending tomorrow/today (monday) the 3rd

 

ttt ... prices are negotiable


[Modified by mntdewred, 10:21 PM 3/3/2003]

 

ttt....prices have been reduced

 

ttt for the european folk who are waking up now

 

My thoughts exactly. $68 for an SOHC valve cover? Are you kidding? $195 for the AEM regulator? :sigh:

 

bump for a good seller . recieve my stuff in 3 days.

 

hey, thanks for the bump! seeing how aem lists the fpr at $231, $195 is a discount. if you can find it for cheaper, then go buy it there. i'm not pulling anyone's arm to buy these parts from me. i could careless if these parts sat here forever. and $68 for a valve cover is fine. what makes a sohc cover different from a dohc cover which generally costs more? both have the same functions, right? there you go. have a nice day

 

ttt for those early european risers

 

:sigh:


[Modified by Tony Starks, 2:32 PM 3/7/2003]

 

Rule #7 of the rules of the FI classifieds:

7) Please be courteous to other sellers. No posts saying you have the same part you will sell cheaper.

 

morning bump

 

Got my stuff today. Quick delivery. from me. Thanks,

-Ryan

 

Your Welcome. Hope everything turned out well.

TTT for those European folk

 

ttt

 

see something you like, feel free to pm me any kind of offer. theres no offer not to consider.

 

ttt for the mornin peeps

 

ttt for the mornin peeps

 

still got the V-afc???