My PR3 is with Adrain "Hyperducktuning" right now, I am getting the "Mines" and the "Spoon" program chips. The Mines is a no rev limit 5.2k rpm vtec chip, and the Spoon is a 8.7 rev limit 4.8 rpm vtec crossover chip. The Mines is supose to be good for ITR/CTR cams...which I have. The Spoon is just good for gas mileage for when not racing. I have RC 270cc/min injectors so I didn't want to get the Mugen program to start with.... later I will buy it and try it out. There is also a "TODA" program to try out... but say's is best with the A/B spec camshafts.

So just checking for feedback on peoples PR3 chip experiences.

 

Adrian has a lot of dyno experience with different chips and different setups so he's a good guy to send your ecu to.

I have use his Mugen chips in a PR3 and PM6 and they both work great

 

Cool, I hear nothing but good things about Adrian and the work he does. Thanks for the reply.

 

I have ctr cams in my b16 w pr3 ecu and I was planning on getting a chip also, anyone have any experiences with various chips?

 

ran a mugen chipped pr3, ran rich *** hell, HORRIBLE for the winter here in canada, had to get something better.

-Eric

 

bump............. because I am interested in more feedback too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by virginia_dude &raquo;</TD></TR><TR><TD CLASS="quote">bump............. because I am interested in more feedback too.</TD></TR></TABLE>