Removing a block stamp?
I would like to remove my block stamp this is the easy part, now I would like to put a b16 in place of the b18 so how would I go about doing this to make it look authentic? I could dremmel it in but I dont think it would look good enough to pass.
thanks
mike
thanks
mike
thats very illegal I wouldn't suggest it but if you want to you would have to use metal stamps you use a hammer and punch in what you want it wont look authentic either
Actually, I think his reasons are none of the above. Rather, we are probably talking about a California guy who is trying to make their motor emissions legal. Theoretically, an LS-VTEC (which has the B18A1 or B18B1 stamp) could be made legal if it was changed to B16A3.
[Modified by StorminMatt, 5:32 AM 2/14/2003]
[Modified by StorminMatt, 5:32 AM 2/14/2003]
Trending Topics
Actually, I think his reasons are none of the above. Rather, we are probably talking about a California guy who is trying to make their motor emissions legal. Theoretically, an LS-VTEC (which has the B18A1 or B18B1 stamp) could be made legal if it was changed to B16A3.
I did it for the same reason... To cover up some stolen ****... hahaha j/k Most people don't realize that my friend's B16A has a 270mm deck... Check it out, can you tell? Yes i realize that this is illegal but whatever... It's kinda hard to make out but yes this is a B18C
Modified by Kataku2K3 at 9:41 AM 11/8/2003
Modified by Kataku2K3 at 9:41 AM 11/8/2003
I think hes just trying to make it so if ppl look at his stamp they see B16 and think its weak. compared to a 1.8L.

BTW, what's up with the rash of posts containing illegal things? First there was a post on how to add a number, then there's another on rolling back the mileage...now this?
What's so wrong with going legit?
I forgot to add, if you are worried about people telling then I wouldn't swap a B18A/B badge for a B16A... If you know what to look for from the front of the block you can see a major difference in the casting... As the B16A and B18C are the same except for the B18C's additional 7mm deck... That is also very noticable.. Either way if someone knows what to look for you won't be able to trick them.. Even with the way I swapped my friend's badge a person who knows Honda motors could tell.. As for running an oil line on ur LSVTEC the so called "B16" your reason could be that you had internal oil feed plugged for turbo and that's why you have an external oil feed.. hehe That's just what I would say tho.. Peace
it's as simple as not opening your hood, or cover the stamp with some gunky axle grease! i have people come look at my engine, and half the time they won't notice that they're looking at a crvtec, and not a ls/vtec as they are told. my .02c
[Modified by smokey2.0, 2:41 PM 2/15/2003]
[Modified by smokey2.0, 2:41 PM 2/15/2003]
Yea I guess that works too but i can't stand motors when they get dirty... That and the wiring have to be totally perfect, for me... Not popping the hood works too.. hehe Peace
I would like to remove my block stamp this is the easy part, now I would like to put a b16 in place of the b18 so how would I go about doing this to make it look authentic? I could dremmel it in but I dont think it would look good enough to pass.
thanks
mike
thanks
mike
THIS IS EXTREMELY ILLEGAL NO MATTER WHERE IN THE US YOU ARE, AND IF YOU'D LIKE TO SO ABOUT 5 YR FOR FRAUD GO AHEAD.
either your trying to play with a stolen part or your trying to pass one off
well either way you cant do it unless you do it like was done on the red block above but then again people are gonna look at a block thats painted and say that thing was out and machined so it prolly has some work in it built i would think a built b16 would be scarier than a stock b18 just oppinion and i didn't mean to question you i just didn't think about under rating a car
well i think everythings stolen because i have lost so much 1000's on scammers and my 99 gsr was stolen it was also broken into and vandalized all in good areas so i just think everything is stolen too many corrupt people
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bobbysteelz »</TD></TR><TR><TD CLASS="quote">Where are u located bro?? I just had my GSR Hatchback stolen last week from central jersey... IM me we'll talk.
</TD></TR></TABLE>
lol. i wanna hear that conversation. or see it.. whatever...
</TD></TR></TABLE>
lol. i wanna hear that conversation. or see it.. whatever...


