Hey guys ive been looking for directions to hookup v-tec and the knock sensor to the ECU. Ive searched and searched but cant find anything on this. Can someone help me please.

 

does anyone know?

 

are you just trying to run the wires from the engine to the ecu?

 

yeah directly to the ecu nothing else.

 

I can find the locations for you. I need to know what year lude your ECU is from, and if it is a 5spd or auto.

 

The ecu is a 95 prelude 5 speed. The accord is a 93 ex 5 speed.

 

can anyone not help with this at all?

 

I will get the info for you. I have not been at work for the last few days because of the 3 feet of snow on the ground but I will get the locations today.

 

O.k. I found it. There are four wires that have to be connected. One for the knock sensor. Two for the vtec pressure switch. One for the Vtec solenoid valve.

The knock sensor wire connects to the 22 pin connector in pin number 2(red/blue wire).

The green wire for the Vtec pressure switch runs to the 22 pin connector in pin number 14.
The other wire (black/red) runs to ground.

The wire for the Vtec solenoid valve (green/yellow) runs to the 26 pin connector in pin number 15.

Sorry for the delay, I have not had access to the info because I could not get to work. I hope this helps.