Ok i have a full front clip that I am picking up friday (S13), (they will not deliver). I have a 6X8ft trailor to pick it up on. the clip is on a pallet and they will use a fork lift to get it on there. The traiolr has a good full ramp but how will i get the pallet off it? The weight is 1300lbs total. any ideas guys? So far here are our options.

1. put a hand pallet mover on teh trailor first and use it to roll it down the ramps.
2. Use steal pipes and roll it off roman style.
3. back the truck up and hit the brakes hard and slid it bit by bit. Im not worring about damage as the ramp as only a 35 degree angle to it.
Any ideas guys? how have you do this? Could i put the stock wheels on it an move it?

 

Not to be a bad guy or anything, but how does this relate to Forced Induction?

 

I hear that. I have been on the FI forum forever and these guys have the best ideas. And allways help me out

 

Hey guy, try this.. hook the pattet to something.. when it is on the trailor..then drive slowly away .. and the pallet will get pulled off the trailor

 

I totally hear ya there man, We though of that but we have noting to hook it too but a flimsy wall

 

Just use a cherry picker and have some help around.
That worked w/ the prelude front clip we had in the shop last month.

 

Just build the car on the trailer and then drive it off when you're done.

 

go rent a uhaul for the day

 

yea i had a gsr front clip from japan. just use a engine harners or cherry picker or whatever and mount it to the shock towers, that's what i did. hth.

 

I got this on lock down now. Got me a pallet jack (the thing for moving pallets with wheels and a tild bed trailor. Should be easy. tilt, jackup, and roll off