Spoon head gasket and Volk wheels
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 186
Likes: 0
From: Nova Scotia, Can., canada
Spoon head gasket and Volk wheels
Hey there. I haven't had any luck in the "best buys" section but I'm sure I can get some answers here. I need a new head gasket and want a Spoon 2 layer. I have seen the prices all over the place from as much as $200 to as low as $130. Is there anywhere with better prices? Also I want a set of Volk wheels. Who has the best prices out there? Who is the best to deal with as far as customer service? Thanks in advance.
Honda-Tech Member
Joined: Mar 2000
Posts: 6,929
Likes: 2
From: Kelowna Canada
Re: Spoon head gasket and Volk wheels (jdmb18c)
Call A&J Racing for best Spoon prices in Canada: 604 279 0329
Remember if you order stuff from the States you pay exchange, import duty, taxes and brokerage fees.
Volks are going to run you at least 4 grand in Canadian dollars.
Remember if you order stuff from the States you pay exchange, import duty, taxes and brokerage fees.
Volks are going to run you at least 4 grand in Canadian dollars.
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 186
Likes: 0
From: Nova Scotia, Can., canada
Re: Spoon head gasket and Volk wheels (B2FiNiTY)
I was just talking to a guy from R&D and have checked out JDM Spec and IPS. They had some of the best prices I could find. Also Inlinefour had a good price on the gasket.
Honda-Tech Member
Joined: Jul 2002
Posts: 2,758
Likes: 2
From: northern, virginia, USA
Re: Spoon head gasket and Volk wheels (jdmb18c)
Also Inlinefour had a good price on the gasket.
Member
Joined: Jul 2001
Posts: 2,947
Likes: 0
From: York, Pa
Re: Spoon head gasket and Volk wheels (VTEC-DA)
Also Inlinefour had a good price on the gasket.
It seems like 99% of the people on this board will tell you to stay away from InlineFour, so I am here to tell you to not listen to them. I have dealt with them 4 different times. Twice ordering very large items and twice small items, and I have had ZERO problems with them. Highly recommended by me.
It seems like 99% of the people on this board will tell you to stay away from InlineFour, so I am here to tell you to not listen to them. I have dealt with them 4 different times. Twice ordering very large items and twice small items, and I have had ZERO problems with them. Highly recommended by me.
Trending Topics
Thread Starter
Junior Member
Joined: Oct 2002
Posts: 186
Likes: 0
From: Nova Scotia, Can., canada
Re: Spoon head gasket and Volk wheels (Tweakmeister)
From what I have read there isn't a differance other than the spoon is 0.45mm and the mugen is 0.47mm. Spoon is thinner buy very little.
Honda-Tech Member
Joined: Jan 2000
Posts: 4,968
Likes: 0
From: Chattanooga, TN, USA
Re: Spoon head gasket and Volk wheels (jdmb18c)
From what I have read there isn't a differance other than the spoon is 0.45mm and the mugen is 0.47mm. Spoon is thinner buy very little.
Honda-Tech Member
Joined: Jan 2000
Posts: 4,968
Likes: 0
From: Chattanooga, TN, USA
Re: Spoon head gasket and Volk wheels (George Knighton)
Since there is so little difference buy a Mugen and support the Expo sponsors
Spoon is represented by other Expo sponsors, including IPS Racing and R&D Motorsports.
IPS Racing is responsible for the Spoon ITR being at the Expo.
Since there's so little difference, buy from the little guy, and you'll still be supporting the Expo sponsors.
Spoon is represented by other Expo sponsors, including IPS Racing and R&D Motorsports.
IPS Racing is responsible for the Spoon ITR being at the Expo.
Since there's so little difference, buy from the little guy, and you'll still be supporting the Expo sponsors.
Ok so if you buy spoon, although I don't dislike Inline4 but get it from IPS
Honda-Tech Member
Joined: Jul 2002
Posts: 2,758
Likes: 2
From: northern, virginia, USA
Re: Spoon head gasket and Volk wheels (MISFIT)
i am willing to bet its 99% of the people like inline. Its just the opossite of what you said. they are a good company with great costomer service.
Thread
Thread Starter
Forum
Replies
Last Post
