Mugen Headgasket height?
Thread Starter
Junior Member
Joined: Feb 2002
Posts: 246
Likes: 0
From: Houston, TX
Mugen Headgasket thickness
Anyone know how much thinner the Mugen headgasket is than OEM?
And what I have written down is that stock headgasket is .029". Is this correct as well?
TIA
[Modified by Spike2, 2:39 AM 2/3/2003]
And what I have written down is that stock headgasket is .029". Is this correct as well?
TIA
[Modified by Spike2, 2:39 AM 2/3/2003]
Honda-Tech Member
Joined: Jun 2002
Posts: 9,925
Likes: 0
From: Milwaukee, WI, USA
Re: Mugen Headgasket thickness (Spike2)
METAL HEAD GASKET
A two-layer construction is used instead of the normal three-layer gasket plate construction, and a rib (+0.07mm) is laser-welded close to the plate surface sleeve to prevent blowout occurring at high compression. This head gasket raises the compression ratio by 0.4 points. Construction is entirely of stainless steel.
A two-layer construction is used instead of the normal three-layer gasket plate construction, and a rib (+0.07mm) is laser-welded close to the plate surface sleeve to prevent blowout occurring at high compression. This head gasket raises the compression ratio by 0.4 points. Construction is entirely of stainless steel.
Thread
Thread Starter
Forum
Replies
Last Post
crackerjacker006
Honda Civic / Del Sol (1992 - 2000)
4
Apr 8, 2007 09:17 PM
