Watned to Trade: 95 fully built GSR motor
Due to my car being stolen a couple weeks ago I am forced to sell or trade my 95 fully built GSR motor. I would like to trade for either an LS turbo or GSR turbo motor. Would like it to be in good condition. SO for guys who like to go to the all motor side heres your chance.
The motor has not been ran at all or has even been put in any car. It has sat and been covered in my friends shop. Here is what the motor has.
95 GSR block bored to .25
all new seals
micropolished crank
new timing belt, oil pump and water pump
.25 CTR pistons polished by Tom at Portflow
new head gasket
Spoon magnetic drain plug
PR3 head ported and polished by Portflow
5 angle valve job
Portflow ti retainers
ITR valves
ITR lost motion assembly
TODA valve spring set
TODA spec B cams
Spoon cam gears
Spoon ventuli plate
ITR intake manifold
JG throttle body
B & M fuel pressure regulator (silver)
P28 ecu Mugen chipped
Brand new ss 5Zigen 4-2-1 header (never been used)
95 GSR S80 tranny
Spoon flywheel
ACT 6 puck clutch
Including 2 valve covers both stripped of paint. Both in great condtion except one is cut for cam gears.
This is a complete swap, the only thing you might want to do is to switch out the injectors to RC 310's cause right now I have stock GSR injectors blueprinted by RC.
There is more that I'm including with the swap but at this moment I need to go to the shop and see what else is on it. If interested please IM me. If no trade I will sell out right for $3500 . nothing more, nothing less. Please IM me for serial #.
Thanks.
The motor is currently at my friends shop in Sacramento CA. The shop is called Capital High Performance. Please check out there site for more info. http://www.capitalhighperformance.com
[Modified by otacon, 12:33 AM 1/28/2003]
[Modified by otacon, 1:32 AM 1/28/2003]
[Modified by otacon, 6:08 AM 2/7/2003]
The motor has not been ran at all or has even been put in any car. It has sat and been covered in my friends shop. Here is what the motor has.
95 GSR block bored to .25
all new seals
micropolished crank
new timing belt, oil pump and water pump
.25 CTR pistons polished by Tom at Portflow
new head gasket
Spoon magnetic drain plug
PR3 head ported and polished by Portflow
5 angle valve job
Portflow ti retainers
ITR valves
ITR lost motion assembly
TODA valve spring set
TODA spec B cams
Spoon cam gears
Spoon ventuli plate
ITR intake manifold
JG throttle body
B & M fuel pressure regulator (silver)
P28 ecu Mugen chipped
Brand new ss 5Zigen 4-2-1 header (never been used)
95 GSR S80 tranny
Spoon flywheel
ACT 6 puck clutch
Including 2 valve covers both stripped of paint. Both in great condtion except one is cut for cam gears.
This is a complete swap, the only thing you might want to do is to switch out the injectors to RC 310's cause right now I have stock GSR injectors blueprinted by RC.
There is more that I'm including with the swap but at this moment I need to go to the shop and see what else is on it. If interested please IM me. If no trade I will sell out right for $3500 . nothing more, nothing less. Please IM me for serial #.
Thanks.
The motor is currently at my friends shop in Sacramento CA. The shop is called Capital High Performance. Please check out there site for more info. http://www.capitalhighperformance.com
[Modified by otacon, 12:33 AM 1/28/2003]
[Modified by otacon, 1:32 AM 1/28/2003]
[Modified by otacon, 6:08 AM 2/7/2003]
please someone take this out my hands. price is now $3200 it's been in the shop to long. it's ready to go all intact and covered up. please IM me if your interested and I will give you the serial#'s.
please don't ask me how much horse power it will do cause it's basically brand new, rebuilt and everything. i have never put it in my car so i have no numbers on how much it will put out. again the price has been dropped to $3200 way cheaper than an ITR swap or GSR. my loss is your gain. I will be out of the scene for awhile since my car was stolen. so i have no more use for the engine. you can check the motor out anytime if your in the sacramento area. thank you.
please don't ask me how much horse power it will do cause it's basically brand new, rebuilt and everything. i have never put it in my car so i have no numbers on how much it will put out. again the price has been dropped to $3200 way cheaper than an ITR swap or GSR. my loss is your gain. I will be out of the scene for awhile since my car was stolen. so i have no more use for the engine. you can check the motor out anytime if your in the sacramento area. thank you.
Trending Topics
so is this just the motor and tranny, or is it a full swap? if jsut motor and tranny, how much do you tihnk all the rest of the parts for a full swap into a 5th gen civic would be? thanks.
CHRIS
CHRIS
Thread
Thread Starter
Forum
Replies
Last Post
W C L
Classifieds: Forced Induction
9
Apr 20, 2004 10:15 PM



if I got somebody to buy my stock gsr motor, I'd try to buy it, good luck man 