Mayhem Racing brought their race/show car to the dyno for tuning. I kept the tuning pretty conservative. We made 467whp and 284tq at 27psi. This is what he said he has...

B16A2
AEBS sleeves
83mm 9:1 ROSS
Eagle rods
Built head
stock B16 cams
JG intake
BBK TB
ITS 60-1/T3
870cc injectors
Hondata 2B
AVCR
Tial 35mm WG
Turbochargers.com IC
Tial BOV
Hotshot manifold (modded)

I think thats about it.. cheezefrog will posting the dyno sheet and pics soon.. its kind of a crappy dyno sheet but the car ran very smooth. The car runs at a solid 12.1:1 A/F. Pretty interesting set up.. just thought I would share


jason

Oh yea.. we will be taking it to the track if we can get the slicks to clear the brakes.

 

nice number for a t3 !

 

Not really much of a T3 , just the exhaust side. Kick *** numbers as usual jason!

 

very nice..any videos?
when does it spool by?


[Modified by SiRkid, 12:25 AM 1/22/2003]

 

Thats a lot of PSI!! 60-1 breathing some life into the b16. Looking forward to the dyno sheet>

 

Very nice #'s, what is the a/r on the turbo?

 

 

Here's some pics. Sorry about the color quality. I didn't have a chance to balance them... pretty much raw pics (resized) straight from the camera.







ph33r my l44t Windows Paint skillz (using a notebook touchpad).


[Modified by CheezeFrog, 6:55 PM 1/21/2003]

 

nice torque curve!!!! flat !!!!(once turbo is spooled)
bushur(sp) ic?

what a beautiful car


how does it drive?


[Modified by SiRkid, 1:00 AM 1/22/2003]

 

I like that intercooler ALOT. VERY VERY nice. Did you build it?

 

83mm?
thats not all thats small...comes out to maybe a 1.9L or so...

 

No it doesn't.

Nice Job Jason...

Nice Pics CF.

 

He said turbochargers.com IC

http://turbochargers.com/currentspecials/FMIC.htm

 

83mm B16 is hardly 1.9 liters. It's 1675cc.

Sonny

 

Nice numbers, that 60-1 seems to be working well for ya! Hope to be in that hp range eventually. Good luck and post some track times when you get em.

 

 

thats almost as much power as that other built Si w/ 500 hp.

is this on pumped??

 

dam it didnt start spooling till 5grand

 

Nice. The b16 really holds on to the torque curve!

 

Nice!!!

 

Are those coathangers holding up the InterCooler? jk, nice car, nice #'s

 

Thanks for the positive replies..

The turbo is what ITS has spec'ing for me for the past 2 years. I honestly dont know the exact specs, I know it has a stg 5 turbine.

Mayhem Racing built the turbo system. I just advised them on the turbo, manifold and fuel system components..

I forgot to add that this was done with a 255lph intank pump and stock lines.

Ill keep you updated.

jason

 

you're right, I was thinking thats a b18.

 

Sorry I forgot to add that the runs were made on 117 octane race gas.

jason

 

What were you using to tune it with?