installing alarm right now, everythings ripped apart in my car, i can't figure out how to wire the alarm into the battery... how to get power to the alarm brain...

i know this is probably really stupid, but there's no way i can get past the firewall.... i don't want to just run the wires through the crack of the hood/door....

i have an integra 00 ls.... need help fast... let me know....

 

i tried wiring it into something in the fuse box that's powered when the keys off... but can't find anything that has enough voltage....

HELPPPPP

 

Hook it to the white wire at the ignition harness.

 

thanx man...

everythings done now, tried out the alarm before i put door panels, and consoles back in, it worked

after everything was put back in place, nothing works at all... the flashing led doesnt even light up, no clicks from the brain when remote is being pressed.... i checked all connections coming out of brain... everythings fine... was real carefull when putting stuff back in, nothing could of popped out....

any ideas?

this happened once before in the midst of installation, but i just held the kill switch to reprogram the remote, and it just worked again...

tried that...

of no use...

any ideas are appreciated

thanx