This is for a 2001 Honda Accord Sedan, LX model w/ 4 cylinder VTEC engine. I'm trying to get the positive cable from my amp to hook up to the positive end on the battery. Problem is, it has to go through the firewall and I'm having a tough time finding a way without drilling. Does anyone know how I can run the cable through the firewall without drilling and taking apart the firewall itself? If drilling is the easiest method, any recommendations on where I should put the hole? I'm trying to run a 16 guage cable through btw.


[Modified by fronell, 10:44 PM 12/30/2002]

 

That's funny, I always used an antenna mast that I sharpened on a grinder too. RED FLAG: Did you say 16 Gauge wire??? 16 Gauge wire is not sufficient for your amp. I wouldn't run less than 10 gauge for any amp worth installing. How many watts is the amp?

 

I know that 4th gens had a rubber grommet in the passengers side footwell too, right up in front of the ECU.

 

And please don't forget to fuse it within 12 inches of the battery.

 

yeah, this is actullay a pretty important step, could save your whole car someday