P30 ecu pin #'s for o2

Reply Subscribe

Thread Tools

Search this Thread

Dec 12, 2002 | 11:50 AM

bumpin_bass

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 393

Likes: 0

From: Spokane, WA, USA

P30 ecu pin #'s for o2

Hey like topic says I need the 4 pin #'s for the oxygen sensor. Code 1 is throwing and I tried known good o2 sensors, so I think a wire is bad.

Dec 12, 2002 | 01:58 PM

bumpin_bass

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 393

Likes: 0

From: Spokane, WA, USA

Re: P30 ecu pin #'s for o2 (bumpin_bass)

top

Dec 12, 2002 | 09:05 PM

bumpin_bass

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 393

Likes: 0

From: Spokane, WA, USA

Re: P30 ecu pin #'s for o2 (bumpin_bass)

ttt

Dec 14, 2002 | 03:46 PM

bumpin_bass

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 393

Likes: 0

From: Spokane, WA, USA

Re: P30 ecu pin #'s for o2 (bumpin_bass)

The heated part of the o2 is working. So I just need to know where the white wire and light green wire go. The white wire from the harness is shielded so is that supposed to be the signal wire? The green wire looks like it is supposed to go to pin C22 but I am not sure; it also looked like it goes to ground. Can I just ground both of these wires?