I am about to get HID........

I heard I need different fuse..

What exctaly do i have to change???

thx for the help

 

Change your headlight fuse to 15A or higher. Simple swap. It should be the fusebox under your steering wheel.

 

 

McChulloch HID's says you should use a 20 amp fuse with their setup. so i would say use 20

 

Ty.

 

I use 15A for my 4300k philip's kit. There is no harm in running the 20A though Better safe than sorry.


[Modified by B2FiNiTY, 3:37 AM 12/11/2002]

 

yup better safe. its not like its cheap. good thing McChulloch provied warranty!

 

 

I would think, if anything, you'd want to run the lowest amp fuse the circuit would allow. That way, if something in the system did go wrong, the fuse would be the weakest link, rather than some other part of the curcuit. This is also why most automobile owner's manuals stress replacing fuses with the same amperage as the one that has blown.

 

i've got the stock fuse for over 2 years now with philips ballests

 

changed mine to 20 with the phillips kit.

 

Im rocking a 25.

 

i am using 20A for my phlilps kit..

 

i use an upgraded harness and left my fuses the same