Here is my 'polished' 14B
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 2,929
Likes: 0
From: Ride Naked
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 2,929
Likes: 0
From: Ride Naked
Re: Here is my 'polished' 14B (BrokenVtec)
I used either number 7 or number 2 buffing compound then finished with "Lava" brand pumice soap (the green kind in a red bottle).
-Dustin
-Dustin
Honda-Tech Member
Joined: Mar 2002
Posts: 4,546
Likes: 0
From: MD
Re: Here is my 'polished' 14B (BrokenVtec)
Funny you showed that...I spent a good hour and a half today sanding my valve cover, and that same motor mount! cept yours looks a lil better than mine...I concentrated on the valve cover more.
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 4,546
Likes: 0
From: MD
Re: Here is my 'polished' 14B (BrokenVtec)
yeh im about ready to say fkuc it and concentrate more on the top part of the 'cover, and less on the little (well..not little when it comes to sanding) curves
B*A*N*N*E*D
Joined: Sep 2002
Posts: 2,661
Likes: 0
Re: Here is my 'polished' 14B (Autocratic_1st_Gen)
This is my 14B turbo. I decided to sell it and get a T25, so I polished it just for fun. It was hard and not fun
[Modified by CHEAPTURBOdotCOM, 5:40 AM 12/9/2002]
Honda-Tech Member
Joined: Aug 2002
Posts: 12,100
Likes: 0
From: Stockton, CA. 209
Re: Here is my 'polished' 14B (BrokenVtec)
i polished my motor mount with sand paper (200 grit to 1500 grit) and then used mothers aluminum polish.... this is the result.
Thread
Thread Starter
Forum
Replies
Last Post
