How to get parkinglights to come on with keyless entry?
While I'm doing this I figured I would asked. My Autoloc told me to hook it up one way and I did it right but the keyless doesn't work with the wires hooked up. It told me to the following...
87 - Wire into the parkinglight wire
86 - 12+ constant
30 - wire it into 86
85 - a yellow wire from the reciever
When ever that yellow wire is plugged into the relay my locks don't work at all, if I pull it out they magically work again. So any ideas of how this should go. I did just what Autoloc said and it didn't work so now I'm asking you guys.
87 - Wire into the parkinglight wire
86 - 12+ constant
30 - wire it into 86
85 - a yellow wire from the reciever
When ever that yellow wire is plugged into the relay my locks don't work at all, if I pull it out they magically work again. So any ideas of how this should go. I did just what Autoloc said and it didn't work so now I'm asking you guys.
I think they all might be +. The yellow wire is what I touch to a 12+ to program the remotes so do you think I need a ground on one of them?
Thread
Thread Starter
Forum
Replies
Last Post
ScottEK
Audio / Security / Video
6
Jul 23, 2003 10:06 AM
OldSchoolHatch
Audio / Security / Video
7
Jul 12, 2003 09:55 PM



