brand new ,micropolished...$650

 

is it yours?
did you get the other crank?

 

Crank for what block?
What about rods and pistons?

Zee

 

no Trever, it,s jerry's
I picked up mine and jerry wants one too, so he is selling this one.

as far as rods go, this crank will require custom length rods(-3mm from ls rod length) or custom pistons with pin raised 3mm with stock length LS rods.

 

Jerry should be going the other way with his stroke.
back to the top

 

so its for an ls block i take it?

 

All b series cranks are interchangable. It will fit b16a b18a b18b b18c1 b18c5 b20b b20z.

 

yeah, what trever said.

as far as jerry goes..he needs that "thick headgasket" to run any crank bigger then his piece of **** crank he is using now

 

yes they are interchangable...but some applications require custom rods or pistons

 

you will need custom rods or pistons if you stuff this 95mm crank into ANY b block other then the old school b20a.

 

check my sig. out for parts. my block deckplate and sleeved, pistons, ,etc.

 

thick as in 5/8''

 

i think 3/4" should do

 

ttt......

 

ttt