When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So i am beginning to take my EG project a little more serious and was looking for some advice on body work. I have a few rust spots on the body of the car I am not sure how to address, the biggest being on the rear driver quarter. I am not sure what was done to it before but there appears to already be a decent amount of bondo on the quarter to begin with. I am wondering if I should cut that whole driver quarter out and weld a new one in, or just bondo over the spot and continue on my way.
Driver Quarter Seam from previous panel patch? Cracking all the way around. Can move this panel with my foot Small crack in bondo on rear passenger side. Can I bondo back over it?
I also have a few spots on the body where it looks like a replacement panel was welded in, but was not welded all the way across the seam and is beginning to crack. How should I address this?
Rear Quarter Rust Repair - EG Hatch
