which pistons/rods to use in a 1st gen b16

Reply Subscribe

Thread Tools

Search this Thread

Nov 18, 2002 | 05:34 PM

supercleanek9

Thread Starter

Joined: Oct 2002

Posts: 3

Likes: 0

From: macon, ga, usa

which pistons/rods to use in a 1st gen b16

CTR or ITR?? I'm indecisive on which ones to get. What are the pros and cons of each. THANKS!!

Nov 18, 2002 | 08:27 PM

vtecvoodoo

Future Texas Boy

Joined: Sep 2001

Posts: 19,060

Likes: 0

From: SoCal Redneck

Re: which pistons/rods to use in a 1st gen b16 (supercleanek9)

Get a 1.8l shortblock while you ar at it.

Ryan

Nov 18, 2002 | 09:53 PM

jdmDXrex

Junior Member

Joined: Feb 2002

Posts: 815

Likes: 0

From: Gresham/Corvallis, Or, United States

Re: which pistons/rods to use in a 1st gen b16 (vtecvoodoo)

i second that screw b16 blocks get a 1.8L more torque is the ****. i swapped out my first gen b16 for a stock gsr block and i dropped .3 seconds even though my compression with b16a head is less than stock gsr. and that still with a completely stock block and head i still have my first gen b16 cams just check out the sig....