So I have a 96 Ek Hatch with USDM GSR w. JDM GSR Transmission w. Factory LSD. Car came with the 32mm CTR 5 lug conversion.
I've tried to do some research and from what I read JDM trannies take 36mm axles? or is just JDM ITR trannies? I found a lot about JDM ITR forums but idk what axles I need to use.
Do I use regular bseries 32mm axles?

Sorry for the waste of breathe and any eye rolling you guys might let off lol.

 

The difference is in the wheel hub, not the transmission.

 

but I thought JDM transmission takes 36mm axle?

 

and with "insane shaft axles" all I see from their stuff is

• 94-01 Integra w/B-series transmission (4-lug/32mm hubs)

can't find "5-lug/ 32mm" so I'm asking do I just use regular axles then?

yes or no
lol

 

The part of the axle that goes into the transmission is the same for both axle types.

 

Use stock b series axles if you have the usdm/ctr 5 lug conversion. The usdm and ctr both use 32mm hubs. Its only the jdm itr thar uses the bigger 36mm hub.

 

Yes, use '99-00 Civic Si OR '94-01 USDM Integra axles for your build.