Troubleshooting: lost 5v to TPS & threw a code. Where to go with this next?
Thread Starter
Honda-Tech Member
Joined: Mar 2016
Posts: 33
Likes: 0
Troubleshooting: lost 5v to TPS & threw a code. Where to go with this next?
Hi all,
I recently lost 5v to my TPS.
I located it to a broken wire within the loom.
I cut the wire by the plugs and soldered in a new wire.
I've now got CEL 5 and 10.
IAT and MAP sensor.
I'm pretty sure these run off 5v too, but do they share the same 5v feed that supplies the TPS?
As in, by cutting the wire at the shock tower plug, have a stopped the feed?
Cheers
I recently lost 5v to my TPS.
I located it to a broken wire within the loom.
I cut the wire by the plugs and soldered in a new wire.
I've now got CEL 5 and 10.
IAT and MAP sensor.
I'm pretty sure these run off 5v too, but do they share the same 5v feed that supplies the TPS?
As in, by cutting the wire at the shock tower plug, have a stopped the feed?
Cheers
Thread
Thread Starter
Forum
Replies
Last Post