yah yeah I knowit sounds dumb but hey if it works than i guess i have a sapre motor and you don't! j/k
i counld possibly getting "free left-overs from a B20vtec setup"
THIS IS STOCk B20 head & STOCK b16a1 block.

1)if i put them together i will it work well(using as a extra motor)

2)This will be like a (1.6 LS) estimated about 135hp and 110tq to the wheels.

3)what kinda CR will this have?

4)can i just use a LS ecu and lean it out w/a FPR?

5)do you think this would be a good daily motor to have in a car?

6)any reiablity issuse that i should worry about?

****to SPICE THINGS UP*****
7) could i use the LS crower 62402-62403 or even better the 62404?

8) this would be a cool experiment don't you think?

9) what timeing belt would i run? (B16)?????

10) if the crower cams don't work than this would be a chep motor for turbo, since the B16 rods can handle about 10-12psi of boost rather than the very weak D16.


comment are welcome......
no need to flame.... just being creative and resourcfull of free and extra parts.

 

COMMON guys this is just an experiment. no harm done.
----just a guy who wants to lear more about honda cars/motors and w/ alot of free parts and some free nights.. hehe

 

sounds like youd be building a zc

search under "reverse ls/vtec" there was a thread on this


[Modified by JCushing, 10:08 AM 11/12/2002]

 

ok ok heres the link

https://honda-tech.com/zerothread?id=206950

 

mang that post sucked *****...

barley any info on that thread. Mostly talking about that stupid TRECEL type R.

common guys.... what to do with extra parts?>

 

ttt

 

I would sell the b20 head and get a b16 head, then you'd have a real spare motor.. or you could put it together and sell it and possibly make some money.

 

no.... money is not what i'm trying to get..... I'm experimenting with this idea.

?---could this be a possible spare motor?
people say that it would be a great engine to rev. and if i get some mild cams and turbo it would be a decent motor.

 

Dont ask...just try it. What have you got to lose?

 

yes when they drop off the block then i will try it. i have nothing to lose but time and maybe $150 bucks or so on miscellaeouse repalce/repaire parts. I just need to know what you all think bout this?

If honda made a (Bseries)1.6 DOHC motor would this combinaton be it?
**** the ZC..... not even thinking about that right now.