I've searched the Interwebs and Forums a little bit but I was wanting some better more straight answers what would be better; an all-motor Integra or a turbo Integra. I'm aiming for 350hp and was looking for a little bit of insight. Thanks in advance!

 

Forced induction 100%, 350-wheel on a N/A B isn't happening there's 1 or 2 guys on here that have around that but it's some crazy race car even 250 is hard pressed and costs way more than a basic turbo set up. If you have a VTEC b-series 350 hp can be done with stock internals just make sure you get a good EMS and a very good tune, the non-vtec ones have thinner rods/weaker rod bolts that's their down fall + the non-vtec head. Go to the forced induction section of this forum you'll find all the answers in the FAQ sticky, you'll get all sort of mixed dumb posts here everything being all over the place.



here everyone thinks they're an expert in the model forums https://honda-tech.com/forced-induction-16/

 

yeah that or you'll get scolded for not looking hard enough through 1,000,000 threads

 

Post and search in the correct section and you'll find your answers, the FAQ is filtered and stickied unlike google/the H-T search engine which is trash.

 

ls vtec and a t3to4b. had this setup for 2 years and was a blast to drive on the street. can be done fairly cheap as well compaired to a fully built na car to get to that pwr goal

 

We do have a force induction section.....

 

Turbo for those power goals cheaper than n/a setup