I recently swapped my 96 integra LS with a jdm B18b. I run OBDIIa and have performed the ckf bypass trick. I have tested the fuel pump (it works) replaced the main relay and traced the wires all the way back to the pump. Everything is in good condition. If anyone has any insight as to wth is going on please Im open to any suggestions.

 

Have you checked the injectors? Fuel Filter?

 

Yes. Im not getting a signal to the pump, but i hot wired the pump to the battery and it works (with multi-meter leads)

 

My .02, throw it on a switch and hide it and you have a fuel pump kill switch.

 

Run it off the relay?

 

There a many ways to hook it up just search (not being a dick). Just remember that layers of security is a start.


Here are a few good reads:


https://honda-tech.com/acura-integra...witch-2755745/
G2IC - Fuel kill switch
Security Main Relay Kill Switch - ClubIntegra.com - Acura Integra Forum
Take 90 mins of your time, protect da teg - Team Integra Forums - Team Integra


There are tons of info, and ways, just don't half *** the job. Take the time to do it right.