132k on body 65k on F20b Dohc motor
Ran fine with no cel running f20ecu but its a euro ecu and doesnt read here runs and drives but stalls due to all four cylinder misfiring this started happening once i used the h22 ecu to run it plus i had switched the upper intake plenum over to a h22 and the iac from 3 wire to 2 wire no idle issue just runs like crap. Im done need to sell it as is I explained everything so please dont ask me the same questions serious inquiries only I had enough I did all I can to try to get it to pass nys inspection. I was told the crank sensor etc. Are in the dizzy hene the 4cyl mis because they get a false reading. Anyhow Im selling the car for $3000 slightly neg. Contact me @ Alwayzb4reel866@gmail.com