I've replaced the compressor and drier(reman compressor) but I'm getting the same problem: compressor engages but air is still hot. Pressure remains the same on suction and discharge side. Before replacing the compressor, suction would drop maybe 2-3psi but discharge will stay the same(~50psi). This time, there's no change at all. System was evacuated for about 30mins and held vacuum for about 5mins so I don't think there's a leak. Also ran flush+compressed air before reinstalling all the hoses.

Is it possible the replacement compressor is bad too?

 

Evaporator is probably dead. Evaporator is inside the heater box behind the dash.