What up guys.

Been reading around in Honda tech for a few months now and finally
Decided to register and account when I got a
Few questions of my own.

My 92 hatch Canadian model has a b18b in it.
Was boosted from what I can tell. Ripped the boost gauges out of car
When Igot iit
Has bigger Injectors and a tb spacer
Oil pan has been welded on front. Where they took the oil
Return tube out.

Aluminum crank pulley don't know what brand.
Had a small knock in the bottom end yesterday so I dropped the pan
And noticed I had one baddddd bearing. Dropped the rod cap and the
Bearing was in 3 pieces.
I had some bearings around from an old L's build I did.
Bearings were new.

Put them on. Did a valve adjustment and put new oil in it.
Ran smooth for the first 3-4 mins after restart. But now I'm
Hearing a scratchingtype noise iinside the bottom end.
What should I do.

Thanks.