Thread refresh.

This For Sale (FS)/Want to Buy (WTB) sticky is for 88-91 CRX/Civic parts ONLY.

These rules will be strictly enforced:

1. Only one post is allowed per member. Keep all of your FS/WTB ads in one post. If you sell an item or need to add an item, edit your post.

2. Sellers/Buyers MUST identify their location in the post.

3. NO Post Whoring or Flaming will be tolerated in this thread. In fact, comments/replies to posts are forbidden. Instead, use the PM feature.

If these rules are not followed, then your post will be deleted.

The thread will be refreshed quarterly, so when it is closed, just repost your active ad in the new sticky.
-----------------------------------------------------------------------------------------

The previous FS/WTB sticky is located here.

 

Looking for two things for my 89 crx:

- right hand side, lower door molding. Must be in mint shape, as i need it for a perfect restoration

- JimFab EF traction bar or Z10

Located in Calgary Alberta, Canada

Thanks!!

 

Location: South Florida, USA
Contact: PM me.
Trades: Stock 88/89 Si wheels. NOS Honda parts. Period-correct rare parts.
Prices: Negotiable. I'd rather have the cash than parts sitting.
Vouches/Feedback: I'm a frequent member on CRXCommunity. You can check my feedback there.

Item: NOS 90/91 Door Side Molding. Six pieces.
Trade: Will ONLY trade for NOS 88/89 Door Side Molding.

https://scontent-a-ord.xx.fbcdn.net/...80879640_o.jpg
https://fbcdn-sphotos-d-a.akamaihd.n...82357365_o.jpg



Item: Circuit Hero Type-2 Machined SS Shift ****
Price: $70/shipped to lower 48. Will trade for a black plastic Spoon ****.

https://scontent-b-sjc.xx.fbcdn.net/...17815132_o.jpg
http://www.jhpusa.com/store/pc/catal...ob-type2_d.jpg


Item: FX-R Projectors. Used, fair condition, could use a cleaning. D2S bulbs.
Price: $80/shipped to lower 48.

https://scontent-a-ord.xx.fbcdn.net/...28818080_o.jpg
https://fbcdn-sphotos-e-a.akamaihd.n...91527828_o.jpg


Item: PWJDM B-Series Oil Pan Baffle Kit
Price: $35/shipped to lower 48.

https://scontent-b-ord.xx.fbcdn.net/...dc&oe=54D18F33

Item: WeaponR 350# 7" Springs. Used.
Price: $70/shipped to lower 48.

https://fbcdn-sphotos-c-a.akamaihd.n...28946228_o.jpg

Item: Si Trans Gearstacks w/new bearings & carbon synchros
Price: $130/shipped to lower 48.

https://fbcdn-sphotos-e-a.akamaihd.n...11170310_o.jpg

Item: 90/91 Rear Mudflaps. Used. Could use some cleaning.
Price: $40/shipped to lower 48.

https://scontent-b-ord.xx.fbcdn.net/...13403631_o.jpg


Item: 92/93 GSR B17A Block, Crank, Rods. Needs a rebuild.
Price: $250. No shipping, local pick-up only.

Item: Ported D16A6 Head. Work by Performance Porting (OneCamOnly sponsor).
Price: $350/shipped to lower 48.

 

WTB: crx oem air intake extension tube only



" border="0" class="tcattdimglink" alt="" />


^^the piece in the middle

located: southern California

 

I am pretty much done messing with cars for now and have a bunch of new oem Honda and aftermarrket parts for my crx. I also have a bunch of used stuff that is in excellent shape. JDM and EDM parts available. Here is a small starter list of stuff. I do not have set prices on most for now until I do more research, but I know I am not in a rush and will not give this stuff away.

As stated in my profile next to the word Location: Im in Middleburg, Florida.

Here goes:

Some of the New OEM Honda parts:
-USDM Si dash (never even a VIN plate attached)
-USDM Si center console
-USDM Si ebrake console
-Left and right dash vents and filler plates
-90-91 Side moldings (all 6)
-Side skirts and door cups
-Most of the moldings and gaskets/ trim parts for a restore
-A bunch of suspension related items for rebuilding 90-91 EX knuckles and a steering rack (with a Qauife quick ratio pinion gear)
-Most of a JDM front is new. I have the complete front end but the headlights (both EDM and JDM) are used as are the fenders. Hood, front and rear bumpers, front lip, and radiator support are all new. I also have a used jdm oem rear lip available with this.
-EF8 Glass roof with the headliner parts included.
-EDM EE8 all black dash (used)
-EE8 "CRX" seats in MINT condidtion
-New 90-91 CRX Front and Rear mud guards
-New CRX push button climate control (never installed in a car)
-New JDM amber clock
-New JDM dual DIN radio bezel
-USDM crx si seats in mint condidtion
-used JDM rear seat set up with all the seatbelts and brackets
-used JDM fog light kit with complete wiring harness and brackets
-JDM EF8 Bronze glass all around (includes windshield, door glass, quarter glass, and hatch glass)
-JDM RHD ppower doors complete with power window set up and power mirrors
-EDM LHD EE8 power window set up x2 (these are black with the red stitching)
-Red TE-37s (15x7, +35)
-Silver Mugen RNRs (15x7, +42)
-White Sprint Hart CPRs (15x7, +35)
-New HKS Sport exhaust (made for a hatch)
-used Toda Version 1 B series manifold
-New polished Hasport Hydro B series mounts and "gold" linkage
-New Rywire mil-spec engine harness for B series VTEC with some special specs. (Basically to run a stocj JDM ITR swap, sensors and all)
-NEW OEM Honda engine harness (never mounts)
-JDM CRX rear storage boxes (rest on the rear seats instead of having the rear storage bin that usdm cars have)
-New JDM under seat storage bin (kinda pointless, but have it anyway)
-90-91 EX knuckles with new OEM honda bearings and ball joints and all that
-New in box Spoon dual piston calipers
-Tons of new suspension items such as PCI trailing arm bearings, King Bearings front LCAs and UCAs, Funtion7 rear LCAs with bearings, SPC toe arms with bearings, Password JDM rear camber kit with bearings, etc.
-Used PIC coilover set with 3 sets of spring rates
-New Carbing front shock tower bar with MC brace
-used Carbing rear shock tower bar
-New Password JDM hood shocks (one set for oem metal hood and one for carbon fiber hoods)
-used ITR rear calipers and such to run larger rear brakes
-New OEM Honda e-brake cables
-complete used crx Si interior (most is used except the stated items above)

and so much more. I will eventually start to take pics and list items here on other sites. If you are looking for anything in particular, I probably have it. Hit me up and ask.
Alan
757-3i9-3o95

 

2. Sellers/Buyers MUST identify their location in the post.

...or they get deleted.

 

So, this included the lower door molding- crx? the one at the bottom of the door. I am specifically looking for the right side, but would by the pair if needed. How much?

 

WTB

91 crx cluster cover/hood

Salem Or.

 

FS: 1989 ZC gears 1-5 and 4.437 FD(cable)

Some rare tranny gears for sale:

Complete ZC gear set 1-5 from a 89 transmission.

1st - 3.25
2nd - 1.944
3rd - 1.346
4th - 1.033
5th - 0.878



Asking $400usd shipped or best offer.


Also have a 4.437 FD from a cable transmission.



Asking $300usd shipped or best offer.


Paypal accepted. Make me an offer on either set.

Located in Ottawa Ontario Canada

 

WTB:

CRX seats. Need the pair. Any color, Any condition. Needs to be within a few driving hours of Poughkeepsie NY.

 

Sold

 

I have a CRX I purchased to use as a track car but it needs too much work, so Ill be putting most of the parts on my other CRX instead. It was a 91 Honda Civic CRX HF (EF). The car had a lot of great higher end parts on it with under approx 5,000 miles on them. I have the following items for sale, all located in Waukesha, WI 53189. I will not ship the big bulky items. The car was built over 2 or 3 years and everything was bought brand new. The parts have under approx. 5,000 miles on them. Some parts have white over spray on them, which can be seen in the pictures.

Text or call me at 262 993 1253







AMR EF Civic/CRX front upper control arms in good working order
asking $150

BWR rear toe link kit for rear disk or rear drum civic or integras

CRX Gas tank fuel pump hanger with wire harness
Asking $55

B series starter. Condition unknown. Might be good, might not be, could be used as a core if it does not work.
$15

88-89 CRX passenger side tail light. Good condition, no cracks but needs a buff job.
Asking $25

EK front strut forks
Asking $35 with the bolts

obd1 P30 socketed and chipped ecu with b16 program
asking 100

92-95 radiator with mishimoto slim fan
asking 25

90-93 DA integra front disc brake conversion with rotors, calipers, and pads
asking 150

crx si rear swaybar brackets (no rust!)
asking 50

 

Selling 90-91 CRX Password JDM smoked corner lights. Nice shape. Looks like the PO drilled a couple small holes in the very bottoms. Maybe had moisture in them? Can't see any other reason for them. Don't think they come this way. Either way they are small. $60 shipped to the lower 48 from Pennsylvania

 

WTB: 89 Civic Belt Molding, driver's side
89 civic driver's door window gasket
rear Honda emblem
passenger side wiper arm

Shipping will be to NY, 12839 zip code

 

Ef8/9 headlights located in west Sacramento asking $190 plus shipping and paypal. Text for pics. 9169562858

 

WTB 1989 Civic rear mudflaps (3 door hatch)

I'll pay for shipping to 85207 (Mesa, AZ).

Thanks. PM me.

 

WTB

1991 Honda Civic Hatchback Dx manual
Engine swap gone wrong some guy that knew how to do swaps cut my harness so now I need this for my last part. I'm located in Reading, Pa 19601.

Price negotiable

 

1990 EF STD shell
Came from cali in 04 per carfax, bought from charlie at topsetup
Painted cargo khaki metallic matching jams
interior/bay is rattle can gray (I have orig color/brand so you can match it) (didn’t want to spend money getting something painted that was going to get scratched since it was a race car not a show car.)
no rust, normal small dents here and there for an old car
New honda OEM bumpers (front was cut for intercooler)
J’s racing knock off lip
brand new honda side moldings (missing right front fender one) fell off on track. Never replaced it.
No heat/no radio Basically a dash with a cluster
No carpet/rear interior panels. HAS headliner/door panels installed
EX front knuckes/prelude calipers/gsr rotors (brakes feel amazing)
Front wheel bearings have 8k miles on them
braided lines (8k miles on them)
DA master/booster
DA prop valve
DA rear disc
PIC rear lower control arms (8k miles on them)
Blox rear toe arms
new honda front upper control arms (8k miles on them)
ES bushing kit on all other stock bushing locations (8k miles on them)
ARP extended studs all around (8k miles on them)
junk shocks and springs just to roll it
B series axles (8k miles on them)
B series shift linkage
obd0-obd1 jumper harness
battery relocated to trunk with box/breathers
stock SI seats
Suja 1 hydro clutch conversion with reinforced clutch pedal (8k miles on them)
Comes with a harness for a b series but id recommend a new one
walbro 255 in tank (8k miles on it)
Sparco hood pins
Front rad support cut out, gives you a lot of extra space for activity’s.
Golden eagle vacuum block
ITR throttle cable (8k miles on it)
Fuel line at firewall was converted to -6 fitting can still run OEM fuel filter if wanted. (ill explain how to do it. Its very simple)
comes on random wheels just to roll it

Included but not installed
Buddy club EF rail for driver side for side mount seat
Spare cluster in Kilometers

$1500 located in chicago
Im out of the car scene for now and have sold all my parts.
Time to get rid of the shell. clear title in hand.
More detailed pictures on request.
Moving to a place without a garage so must sell!!

 

WTB CRX fiberglass doors. Must be willing to ship to CANADA! PM or text 2269726996

 

WTB: BRONZE BDL Fuel Rail for a B-Series!

will consider similar style BRONZE B-series fuel rails.

Shipped to San Jose, CA

 

WTB:
90-91 Crx rear Bumper
88-91 EF Billet Mounts for Hydro B Series
90-91 uncut Crx DX interior harness (DX UNCUT)
90-91 OEM USDM Window Visor
88-91 Crx Rear Triangle

atlanta , ga

 

 

WTB: 1988-1989 HATCH driver side manual window regulator. Must be in good operating condition. Mine is screwed up somehow and lets the glass slide forward when lowered and then makes the glass get stuck when raising it back up. Please PM me with price shipped to Dallas, TX 75217

 

WTB - Hasport EF B series cable transmission mounts, any durometer for urethane, doesn't matter. A full set is fine or even just the transmission mount.

Located in West Texas

Pm if you're selling.

 

Looking for a pair of parking brake cables for an 88-91 Civic hatch. I need the cables for drum brakes, not discs. Looking for something in very good condition. Must be for hatchback only. Located in MA willing to pay for shipping. Thanks for looking.