Morning Tech-ers,

Hoping I can get some help. Have 3 Brian Crower rods but don't know which rods they are exactly. Think they are from a stroker kit. Would love to find out which kit they came from. Don't see any markings on the rods either.

Back story:
Had bought them as a set of 4 B20 rods. Upon installing them with a set of 12.5:1 pistons and the stock crank we noticed that the pistons were just slightly above deck. Installed a cometic head gasket and everything worked perfectly. Engine lasted almost 2 years but one of the bearings was flattened and damaged 1 rod.

I emailed Brian Crower and they sent me back a list of specs for their rods and told me that I need to measure them with dial calipers. Been unable to find this anywhere. See pics below.



In inches:

 

 

http://www.ehow.com/how_7447171_meas...od-length.html