RM Cams on D16A9
Thread Starter
Honda-Tech Member
Joined: May 2010
Posts: 5
Likes: 0
RM Cams on D16A9
Hi guys! I've been searching and I was unable to find any specific information to give me any clear answer to my doubts...
So, there go the question.
I'm going to buy soon Rocket Motorsports camshaft and a kit with - HD Single Springs 45lbs on seat, Spring Seats, Polyacrylic (IN) and Viton Hi-Temp (EX) valve seals andModified Denso U-Groove Spark Plugs.
The camshaft specs he said to me are:
224/224 duration @0.050 with 11mm lift
Will be a lot of difference between these and OEM cams?? I'll buy adj. cam gears, take off 1mm from the head, port the OEM IM and I have an Apexi SAFC to tune the car. Maybe i'll buy exhaust manifold too.
Thanks!
So, there go the question.
I'm going to buy soon Rocket Motorsports camshaft and a kit with - HD Single Springs 45lbs on seat, Spring Seats, Polyacrylic (IN) and Viton Hi-Temp (EX) valve seals andModified Denso U-Groove Spark Plugs.
The camshaft specs he said to me are:
224/224 duration @0.050 with 11mm lift
Will be a lot of difference between these and OEM cams?? I'll buy adj. cam gears, take off 1mm from the head, port the OEM IM and I have an Apexi SAFC to tune the car. Maybe i'll buy exhaust manifold too.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post