I have a h22 stuffed into a crx which is running 9:0:1 compression ratio, bigger cc injectors and walbro pump to name a few things. Its also boosted. What im wondering is, if I leave the turbo disconnected would the car start on a stock h22 ecu (p13) or a p28 loaded with a h22 basemap?

Im talking about starting and spluttering, no revs over 3k. I realise its not a good idea to drive it on that map.

Thanks in advance

 

No. Just, no. Not only did you absolutely TANK the stock CR, you didn't tell us anything useful about the injectors, but I'm going to assume they're at least RDX 310's. Even if you did somehow coax it into running, you'll wash your cylinders into oblivion before you've even broken in the motor.

**** no it's not going to run on a stock ECU. Call Xenocron, get a basemap chip made FOR YOUR SETUP. This is super simple ****.

 

Take the wastegate spring out.

Stock injectors

Stock map sensor and you should be good bro

Don't listen to the haterz

 

Co-sign

 

Thanks for the replies. I'll give it a go