So every thread i've checked is useless to my cause. Need help with tryin to find out how to wire it in since my car was never pre-wired to begin with. Any help would be great! Pictures would be even better!

 

A4 is for the VTEC solenoid and D6 is for the VTEC pressure switch. Run a wire from each of them to their respective areas.

 

You will pop open the back of the ecu connectors and slide the pins in fully and then just close it up and you're done.

You can get a kit from axidworks. Just google his name.

 

http://hondaswap.com/threads/how-to-wire-vtec.40811/
hope this helps, its just 2 wires one is a ground and one goes to ecu.
phearable.net has some great info also. hope this helps. I can go back and look at mine if youneed me to, 4ws models are not pre-wired ether, olny plain si's '93 up.