So I did one sharp u turn and when I got home my front driver side wheel has a really bad negative camber. Only driver side Any answers or ideas why? Thanks

 

take the wheel off and see if anything's bent/broken really simple cmon....


also do you have stock UCA or aftermarket ? seeing as if they're aftermarket there's always the possibility the BJ slipped and is maxed neg.

 

I did there isn't anything bend. Could a wheel bearing do that. And its stock

 

no can you take a pic of this neg camber ?

 

is the cotter pin still there on your lower control arm? where the castellated bolt is?