Garage Cleanout
Thread Starter
Honda-Tech Member
Joined: May 2004
Posts: 314
Likes: 0
From: IL, US
Garage Cleanout
Few items I have laying around that I would like to find new homes for. Prices are obo and trades are welcome. Please be respectful, you are responsible for shipping and associated paypal fees. Thanks for viewing.
ITR armrest out of my 98 - $100. It's worn down in the drivers position but can be easily restored which I may still do. Comes with the blank badge.
Spoon sports kevlar b series cover -$100 [$80 price reduced]
Does not have the logo on the underside, and a couple slight cracks as detailed in the pics.
98+ mud guards $OLD - Used but pretty good shape. They do have some tar material on the inside you can remove with a good cleaning. Fronts are slightly shaved from being lowered. No hardware.
$1000 [$900 price reduced] Carbonetics AKA ATS&Across Single Carbon Clutch Kit 1600kg - for b series. Has maybe 3 miles on it, yes 3 miles not 3k. Its virtually brand new and still needs to be broke in. This was way too aggressive for my near stock setup, but would be great on a heavily tracked car. Please contact me with questions.
This clutch msrp at $1800....
http://www.full-race.com/store/drive...on-clutch.html
$80 - Integra type R carbon driver vent - The left to right adjuster snapped but the open and close still work. Would need to swap the adjuster from a stock piece or seperate the face and reglue. I will let the buyer do the repair, or leave as is, it works fine.
$40 Passenger Axle - Off my R, do not believe its OEM, but its in great shape and still has tons of life. Removed when I did a pair of Raxles on the car.
$OLD! Thank you! - Greddy cooling plate in silver/carbon weave - fits usdm integra dc2 front cars
$30 OEM new timing belt Bando brand, very nice belt
$50/each - B series distributors, one is in perfect working order but was missing the pin needed to show revs on my 98 R, not sure if this is meant for another type of vehicle, dont know. The other dist has a bad sensor.
$OLD! - Misc Donut flange header collector, lost this piece when I sold my plm narrow and just found it , have no use for it. Dimensions: 8" on Length, 2-3/8" Pipe diameter, and 2.5" Collector
ITR armrest out of my 98 - $100. It's worn down in the drivers position but can be easily restored which I may still do. Comes with the blank badge.
Spoon sports kevlar b series cover -$100 [$80 price reduced]
Does not have the logo on the underside, and a couple slight cracks as detailed in the pics.
98+ mud guards $OLD - Used but pretty good shape. They do have some tar material on the inside you can remove with a good cleaning. Fronts are slightly shaved from being lowered. No hardware.
$1000 [$900 price reduced] Carbonetics AKA ATS&Across Single Carbon Clutch Kit 1600kg - for b series. Has maybe 3 miles on it, yes 3 miles not 3k. Its virtually brand new and still needs to be broke in. This was way too aggressive for my near stock setup, but would be great on a heavily tracked car. Please contact me with questions.
This clutch msrp at $1800....
http://www.full-race.com/store/drive...on-clutch.html
$80 - Integra type R carbon driver vent - The left to right adjuster snapped but the open and close still work. Would need to swap the adjuster from a stock piece or seperate the face and reglue. I will let the buyer do the repair, or leave as is, it works fine.
$40 Passenger Axle - Off my R, do not believe its OEM, but its in great shape and still has tons of life. Removed when I did a pair of Raxles on the car.
$OLD! Thank you! - Greddy cooling plate in silver/carbon weave - fits usdm integra dc2 front cars
$30 OEM new timing belt Bando brand, very nice belt
$50/each - B series distributors, one is in perfect working order but was missing the pin needed to show revs on my 98 R, not sure if this is meant for another type of vehicle, dont know. The other dist has a bad sensor.
$OLD! - Misc Donut flange header collector, lost this piece when I sold my plm narrow and just found it , have no use for it. Dimensions: 8" on Length, 2-3/8" Pipe diameter, and 2.5" Collector
Last edited by purplepassiongsr; Dec 18, 2014 at 01:39 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post