JDM GSR Tranny, Skunk2 Parts, Vtec Dizzy
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Feb 2008
Posts: 58
Likes: 0
From: CT, United States
JDM GSR Tranny, Skunk2 Parts, Vtec Dizzy
I got some parts that I no longer need, or have any use for. They were removed from my EG OBD1 swap. I have had NO issues with ANY of these parts, and all are used unless otherwise stated.
CONTACT INFO: PM me on here or TXT ONLY 860-874-5449
LOCATION: Hartford CT.
**Prices listed are pick up ONLY!
JDM GSR Tranny- $350 B/O. NON-LSD. NO popouts or grinds, shifts smooth. I have used this tranny for close to 3 years now, and put about 25K miles. Purchased from Engine Depot, and they say no more than 50K miles on them. Using that calculation, I'd say mileage is anywhere from 60K to 80K. I am however sorry to say that all paperwork was destroyed when my house caught fire late last year. My apologies.
Please note that the inside of the tranny WILL be cleaned before sold. I just removed it yesterday, and haven't gotten a chance to finish cleaning it up.
*BONUS* I've always used Honda MTF with my trannys. I will include 2 US quarts of Genuine Honda MTF with the purchase of the transmission!!
Skunk2 68mm Pro Series Billet Throttle Body w/MAP AND TP sensor. $220 B/O. (Purchased BNIB) Will fit ANY series, BESIDES "K". (B,D,F&H) No gasket included, but they are pretty inexpensive at the auto parts store. ALL SENSORS ARE INCLUDED, and work 110%!
GSR Half Shaft- $75 (Has female and male ends, not a double male)
GSR Axles (one male, one female-for the half shaft above) SELLING AS A SET! $80 B/O
OBD1 OEM DOHC Vtec Dizzy.(B16,GSR,B20V,LS/V) Used on my GSR, believe it is originally a B16. $120 B/O
CONTACT INFO: PM me on here or TXT ONLY 860-874-5449
LOCATION: Hartford CT.
**Prices listed are pick up ONLY!
JDM GSR Tranny- $350 B/O. NON-LSD. NO popouts or grinds, shifts smooth. I have used this tranny for close to 3 years now, and put about 25K miles. Purchased from Engine Depot, and they say no more than 50K miles on them. Using that calculation, I'd say mileage is anywhere from 60K to 80K. I am however sorry to say that all paperwork was destroyed when my house caught fire late last year. My apologies.
Please note that the inside of the tranny WILL be cleaned before sold. I just removed it yesterday, and haven't gotten a chance to finish cleaning it up.
*BONUS* I've always used Honda MTF with my trannys. I will include 2 US quarts of Genuine Honda MTF with the purchase of the transmission!!
Skunk2 68mm Pro Series Billet Throttle Body w/MAP AND TP sensor. $220 B/O. (Purchased BNIB) Will fit ANY series, BESIDES "K". (B,D,F&H) No gasket included, but they are pretty inexpensive at the auto parts store. ALL SENSORS ARE INCLUDED, and work 110%!
GSR Half Shaft- $75 (Has female and male ends, not a double male)
GSR Axles (one male, one female-for the half shaft above) SELLING AS A SET! $80 B/O
OBD1 OEM DOHC Vtec Dizzy.(B16,GSR,B20V,LS/V) Used on my GSR, believe it is originally a B16. $120 B/O
Last edited by crzycivic93; May 6, 2014 at 09:21 AM.
Re: JDM GSR Tranny, Skunk2 Parts, Vtec Dizzy
Please see here: http://hondamarketplace.com/announcement.php?f=10&a=43
Thread
Thread Starter
Forum
Replies
Last Post
crzycivic93
Northeast (Sales)
19
May 20, 2014 03:51 PM