is this a obd2 dizzy?
Honda-Tech Member
Joined: Mar 2007
Posts: 11,399
Likes: 69
From: East Coast 506, Canada
Re: is this a obd2 dizzy?
Yes it very well could be. That is the exact same plug setup that was on my OBD2 96-97 Accord EX (CDN) w/F22B2. It used the external ignition coil.
The '94 would have more wires coming out of the distributor as the TDC & CKP sensors were also located in the distributor. Were as on the OBD2 those two sensors were located down behind the crank pulley & drive gears mounted to the oil pump housing.
The '94 would have more wires coming out of the distributor as the TDC & CKP sensors were also located in the distributor. Were as on the OBD2 those two sensors were located down behind the crank pulley & drive gears mounted to the oil pump housing.
Thread Starter
Honda-Tech Member
Joined: Jan 2012
Posts: 108
Likes: 0
Re: is this a obd2 dizzy?
Yes it very well could be. That is the exact same plug setup that was on my OBD2 96-97 Accord EX (CDN) w/F22B2. It used the external ignition coil.
The '94 would have more wires coming out of the distributor as the TDC & CKP sensors were also located in the distributor. Were as on the OBD2 those two sensors were located down behind the crank pulley & drive gears mounted to the oil pump housing.
The '94 would have more wires coming out of the distributor as the TDC & CKP sensors were also located in the distributor. Were as on the OBD2 those two sensors were located down behind the crank pulley & drive gears mounted to the oil pump housing.
Thread
Thread Starter
Forum
Replies
Last Post
DEFUSE911
Acura Integra
3
Dec 7, 2002 01:50 PM