CP Eagle Ferrea ARP Spoon
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2002
Posts: 633
Likes: 0
From: des moines, IA, USA
CP Eagle Ferrea ARP Spoon
All parts are new, unused, in box. The Spoon LSD is a used unit, but has been inspected, and is in very good shape. Shipping is negotiable with the buyer, I accept PayPal only. Parts are negotiable. Any questions, please respond here or PM, I am here every day. If you would like any more pictures, I can provide by request.
Thanks,
Mike
RODS SOLD - THANK YOU 7mile - Eagle Rods - $300 - Part# CRS5394A3D - BNIB, Big bolt, LS/B20 standard H-beam rods
MAIN STUDS SOLD - Thank you redeg666 - ARP GSR Main Studs - $80 - Part# 208-5403 - BNIB
VALVES SOLD - THANK YOU axel kain - Ferrea 6000 Series valves - $250 - Part# F6048(IN) / F6049(EX) - BNIB
CP Pistons - $500 - Part# SC7012 - BNIB, includes rings, wrist pins, and locks - 83mm 9.0:1
Spoon Sports LSD - clutch type LSD - $800 OBO - Unknown miles, but upon inspection, plates look in very good shape. It is made for a hydro GSR/ITR transmission. It comes with the 10 bolts for the ring gear, and the required speedo gear. It came in a transmission I serviced with the wrong speedo gear installed. It slightly galled some of the drive, but I cleaned up the grooves, tested it in a housing, and it tracks and turns properly.
Thanks,
Mike
RODS SOLD - THANK YOU 7mile - Eagle Rods - $300 - Part# CRS5394A3D - BNIB, Big bolt, LS/B20 standard H-beam rods
MAIN STUDS SOLD - Thank you redeg666 - ARP GSR Main Studs - $80 - Part# 208-5403 - BNIB
VALVES SOLD - THANK YOU axel kain - Ferrea 6000 Series valves - $250 - Part# F6048(IN) / F6049(EX) - BNIB
CP Pistons - $500 - Part# SC7012 - BNIB, includes rings, wrist pins, and locks - 83mm 9.0:1
Spoon Sports LSD - clutch type LSD - $800 OBO - Unknown miles, but upon inspection, plates look in very good shape. It is made for a hydro GSR/ITR transmission. It comes with the 10 bolts for the ring gear, and the required speedo gear. It came in a transmission I serviced with the wrong speedo gear installed. It slightly galled some of the drive, but I cleaned up the grooves, tested it in a housing, and it tracks and turns properly.
Last edited by h22apwrd95; Apr 13, 2014 at 08:43 PM. Reason: items sold
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
da6er
Southern California (Sales)
0
May 2, 2019 06:44 AM
Si Integra
Classifieds: Forced Induction
4
Mar 25, 2011 11:34 AM