B series custom Vtec 86.5mmx92mm stroker kit
Thread Starter
Honda-Tech Member
Joined: Jan 2009
Posts: 99
Likes: 0
From: Mass
B series custom Vtec 86.5mmx92mm stroker kit
PLEASE KEEPED BUMPED. THANK YOU.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $2200 O.B.O + SHIPPING AND PAYPAL FEES. NOTICE I SAID O.B.O(WHICH MEANS I AM WILLING TO LISTEN TO PRICES)
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG]
[/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $2200 O.B.O + SHIPPING AND PAYPAL FEES. NOTICE I SAID O.B.O(WHICH MEANS I AM WILLING TO LISTEN TO PRICES)
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG]
[/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
Last edited by eg_bseries; May 12, 2014 at 12:05 PM. Reason: Forgot to include prices
