hey guys I'm new to this site.my names Jessie and ill be doing a full build on my hatch swap tuck etc. if anyone could tell me how to upload pics? I will post them up tomorrow with my build plans thanks.

 

Upload them on photobucket first then "get links" it's the bottom one will look like: [IMG]vbfbhmcgfbfhondahgbnfg[/IMG]

 

thanks. ^^^ will have pics up tomorrow after work.

 

[IMG]

 

[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
ok guys here's some pics of the hatch.

 

Wow that's dope. Good look on your project bro. Wish you luck and make your dream a reality.

 

thanks bro plans are gsr swap tucked shaved etc

 

Awesome. I'm gonna rebuild my b16 and shave and do what they call shyt I forgot but it's when that make the holes for the pistons bigger so I can put bigger pistons in and boost it. Gonna rebuild the head etc

 

it's called over boring^


Super jealous of that lift in your garage ! What are your plans for that B18c1 or just leave it stock ?. loos like my integra's interior right now lol.

 

swapped 93 thanks man, I haven't got pic up yet but Ive got my b18c1 block rebuilt and just got it today. next is the head going to go with bc springs valves and cams.

 

That's right. Lol looks like I found a shop around the corner from my house. He's the owner of the shop and is really into the whole honda acura lifestyle. I'm gonna have him do everything I want. He says hell do anything anyone wants.

 

Buahahahahahahhahahaaa it's called boring and honing. You bore out the cylinders to a bigger diameter and hone the cylinder walls to create a better sealing surface for the piston rings.

 

ok guys I got my block home its been hot tanked honed all new bearing and rings 81mm. Ill have pics up soon.

 

dose anyone know where to buy a good cage no ebay junk?

 

A roll cage? You don't.

Safety features are all or nothing. No way you need a cage for any class you'd be running with a stock block, so don't bother. If you run a cage, you have to use proper seats, harnesses, remove the air bags, and wear a helmet, always. Running a cage on stock seats and belts with no helmet is a fast way to get dead. Ever seen a skull that made contact with a cage? It isn't pretty.

 

^^ I have a set of racing seats with 5 point harness. so dose any body know where to buy a weld in cage?

 

...are you going to wear a helmet EVERY TIME you drive the car? Sparco, or find a local machinist who will do the work for you, or go to your local race track and talk to the guys who actually HAVE cages on their actual RACE cars and see where they had it done.

Seriously, don't be stupid. When your head hits a roll cage without a helmet, you will probably die.

 

^^ lmao this guy

 

Some of this is funny stock block ehh?? funny i have stock block coupe running 10.90s in which that would def qualify for a cage there sir

 

"This guy" has forgotten more about cars than you've ever learned, and is trying to help you not do something stupid to get yourself (or a passenger) seriously hurt, or killed.

On a stock D/B block? I'm going to go ahead and call bullshit. High 10's takes 500+ WHP, and 500+ WHP with any semblance of reliability takes forged internals and sleeves on a D or B series motor.

So far, I haven't seen a single piece of information to indicate that OP should even be considering a cage. Nothing about it being a dedicated track car, nothing about power goals, nothing about power goals. If he's doing it for "bling factor", then whatever - get some eBay ****, bolt it in, and stop worrying about it. If he's doing it for structural integrity, there are better ways to get it that don't involve cutting up the interior, or ripping it all out to get it professionally welded in, or cracking your skull open and leaving little chunks of your brain on the sidewalk.

 

Heed his advice about the cage or be prepared to get dead. It is wise advice.

 

have any of yall ever flipped a car???? I was in one that got flipped and crushed flat. so im going to cage it the end.

 

ive got a cage in my daily, terrified if I ever get into an accident that i'll split my melon on it.

 

If you aren't going to listen to advice from people with MUCH more experience than you, why are you even on a forum asking questions?

 

Lol, caged daily driver to save your life from flipping a car.