Precision 6466 t3 5-bolt housing low miles
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 8
Likes: 0
From: Burlington, NJ, USA
Precision 6466 T3 and T4 housing low miles
SOLD
I have a Precision Gen 2 6466 with less than 1000 miles. It's in excellent condition, I've always ran it with an air filter and used a dedicated 10 micron XRP inline oil filter for the oil feed line.. I mainly just cruised the car with this turbo since it wasn't tuned so it's never seen real boost.. Comes with a t3 .63 5-bolt & a ceramic coated T4 1.32 divided housing exhaust housing... Asking $1550 shipped plus paypal fees.... Comes with everything shown but the -10 drain flange adapter. I can include the XRP -4AN to 1/8"NPT fitting for the oil feed and vacuum line fitting shown if you want.. Text me 609 four five six 9773 for the fastest response..
http://realstreetperformance.com/sto...er-3159.htmll]
Retail: $1975
Now with Divided T4 housing with v-band out.
Since I've never posted anything for sale over here before, here is my thread on zilva.net where you can also see my feedback.. I have a different username but you can see the same mark on the compressor housing..
NJ Full-Race KA24DE manifold, KA24DE Kelford 272s, Precision 6466 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum
You can see the condition of the compressor wheel good here.. Click on the picture to see it full size..
Small polished mark on the compressor housing from rubbing on my cf hood..
I have a Precision Gen 2 6466 with less than 1000 miles. It's in excellent condition, I've always ran it with an air filter and used a dedicated 10 micron XRP inline oil filter for the oil feed line.. I mainly just cruised the car with this turbo since it wasn't tuned so it's never seen real boost.. Comes with a t3 .63 5-bolt & a ceramic coated T4 1.32 divided housing exhaust housing... Asking $1550 shipped plus paypal fees.... Comes with everything shown but the -10 drain flange adapter. I can include the XRP -4AN to 1/8"NPT fitting for the oil feed and vacuum line fitting shown if you want.. Text me 609 four five six 9773 for the fastest response..
http://realstreetperformance.com/sto...er-3159.htmll]
Retail: $1975
Now with Divided T4 housing with v-band out.
Since I've never posted anything for sale over here before, here is my thread on zilva.net where you can also see my feedback.. I have a different username but you can see the same mark on the compressor housing..
NJ Full-Race KA24DE manifold, KA24DE Kelford 272s, Precision 6466 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum
You can see the condition of the compressor wheel good here.. Click on the picture to see it full size..
Small polished mark on the compressor housing from rubbing on my cf hood..
Last edited by Silent_NightR34; Apr 15, 2015 at 02:38 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbociv910
Mid-Atlantic (Sales)
0
Nov 6, 2007 07:36 PM