Rc, GSR, Walbro, Skunk 2, Edelbrock, HX rims
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2006
Posts: 1,161
Likes: 0
From: The Woods
Rc, GSR, Walbro, Skunk 2, Edelbrock, HX rims
located in Daytona Florida
386-852-4473
All Prices do not include shipping or paypal fees
don't like my prices, PM me or text me a offer
*NEW* RC SL4-750cc injectors
these were bought new from RC, I never installed them and sent back to RC to be checked and cleaned in April($100.00 service), these are OBD 1, Plug and play, no resistor box needed and ready to go
$250.00
1995 B18C1 USDM GSR swap, approx. under 100k miles, has new T belt, water pump, thermostat and a modified, shaved and stripped Valve cover as seen in pics, Block has Endyne vent kit installed already, will come with all mounts and t bracket needed for DC/EG swap, P72 ecu, NGK wires, GSR intake and exhaust manifolds, a spare clutch and BRAND NEW axles, Trans is matching GSR as well with ZERO GRINDS, also has a brand new Comp clutch in it and fresh flywheel cut that go with it
$1800.00 Picked up
386-852-4473
All Prices do not include shipping or paypal fees
don't like my prices, PM me or text me a offer
*NEW* RC SL4-750cc injectors
these were bought new from RC, I never installed them and sent back to RC to be checked and cleaned in April($100.00 service), these are OBD 1, Plug and play, no resistor box needed and ready to go
$250.00
1995 B18C1 USDM GSR swap, approx. under 100k miles, has new T belt, water pump, thermostat and a modified, shaved and stripped Valve cover as seen in pics, Block has Endyne vent kit installed already, will come with all mounts and t bracket needed for DC/EG swap, P72 ecu, NGK wires, GSR intake and exhaust manifolds, a spare clutch and BRAND NEW axles, Trans is matching GSR as well with ZERO GRINDS, also has a brand new Comp clutch in it and fresh flywheel cut that go with it
$1800.00 Picked up
Last edited by Go n 4 10s; Sep 10, 2013 at 12:12 PM.
Re: Rc, GSR, Walbro, Skunk 2, Edelbrock, HX rims
Re: Rc, GSR, Walbro, Skunk 2, Edelbrock, HX rims
located in Daytona Florida
386-852-4473
All Prices do not include shipping or paypal fees
don't like my prices, PM me or text me a offer
*NEW* RC SL4-750cc injectors
these were bought new from RC, I never installed them and sent back to RC to be checked and cleaned in April($100.00 service), these are OBD 1, Plug and play, no resistor box needed and ready to go
$250.00
*NEW* Walbro 255lph in tank fuel pump with Honda OEM connector for plug and play
brand new, never installed and not EBAY fuel pump, not Chinese knock off
$100.00
*USED* Skunk 2 GSR intake manifold, heavily ported TB opening(65mm) and gasket matched runners, very nice condition
$150.00
*USED* Edelbrock 65mm throttle body, comes with working TPS and is very nice shape
$150.00
*USED* 14" HX rims, no curbs or bends, I have all center caps,the tires are fair in the back and it has a brand new set of BFG Drag radials on front, but due from Florida sun and the car sitting, they have become a little dry rotted as seen in pics.
$200.00 with steelies
1995 B18C1 USDM GSR swap, approx. under 100k miles, has new T belt, water pump, thermostat and a modified, shaved and stripped Valve cover as seen in pics, Block has Endyne vent kit installed already, will come with all mounts and t bracket needed for DC/EG swap, P72 ecu, NGK wires, GSR intake and exhaust manifolds, a spare clutch and BRAND NEW axles, Trans is matching GSR as well with ZERO GRINDS, also has a brand new Comp clutch in it and fresh flywheel cut that go with it
$1800.00 Picked up
386-852-4473
All Prices do not include shipping or paypal fees
don't like my prices, PM me or text me a offer
*NEW* RC SL4-750cc injectors
these were bought new from RC, I never installed them and sent back to RC to be checked and cleaned in April($100.00 service), these are OBD 1, Plug and play, no resistor box needed and ready to go
$250.00
*NEW* Walbro 255lph in tank fuel pump with Honda OEM connector for plug and play
brand new, never installed and not EBAY fuel pump, not Chinese knock off
$100.00
*USED* Skunk 2 GSR intake manifold, heavily ported TB opening(65mm) and gasket matched runners, very nice condition
$150.00
*USED* Edelbrock 65mm throttle body, comes with working TPS and is very nice shape
$150.00
*USED* 14" HX rims, no curbs or bends, I have all center caps,the tires are fair in the back and it has a brand new set of BFG Drag radials on front, but due from Florida sun and the car sitting, they have become a little dry rotted as seen in pics.
$200.00 with steelies
1995 B18C1 USDM GSR swap, approx. under 100k miles, has new T belt, water pump, thermostat and a modified, shaved and stripped Valve cover as seen in pics, Block has Endyne vent kit installed already, will come with all mounts and t bracket needed for DC/EG swap, P72 ecu, NGK wires, GSR intake and exhaust manifolds, a spare clutch and BRAND NEW axles, Trans is matching GSR as well with ZERO GRINDS, also has a brand new Comp clutch in it and fresh flywheel cut that go with it
$1800.00 Picked up
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Go n 4 10s
Florida (Sales)
9
Sep 18, 2013 04:23 PM
chayanne
For Sale
2
Dec 6, 2010 06:06 AM