B16A / D16Z & D15 VTEC head, block, pistons and more
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 579
Likes: 0
From: Lawton, OK
B16A / D16Z & D15 VTEC head, block, pistons and more
All prices best offer so if you are interested shoot me a price. I am needing the space and cash so unless you are really low balling me your price will probably fly. I accept pay pal only and tracking info is provided. Shipping is at buyers expense unless we work out a price shipped. I am willing to part any of these things out as well.
B16A block lots of parts are not shown but i have the entire bottom end, all is included. This includes alt, brackets, oil pump, water pump, oil pan, crank, rods and type r pistons. The cylinders on the block are good but crank i don't know about, idiot that assembled the motor (not for me) did a poor job, pretty sure the wrist pins are too big because the pistons do not turn freely. Probable cause of the bearing failure that was present when I found the motor. Pistons are still good though. Currently on Ebay or buy it now for 350$!
D16Z6 head with exhaust porting and crower stainless valves, valve springs and titanium retainers. Exhaust valves are .5mm oversized. The head flow numbers are as follows @ .400 lift:
For whatever reason it is not letting me post pics right now I will try to get them up ASAP!
intake: 190.81
Exhaust: 152.5
Improvement of about 4 on the intake and 9 on the exhaust. I will include all of the numbers from the head porter with the head. This was about a 550$ dollar job on the head. receipts for all parts and work included.
SOLD!
Crower Stage II Turbo cam .430 lift on the intake and .427 on the exhaust. Still in the box and timing card included. This was 300 new and never been used. SOLD!
D15 VTEC head, roller rocker arms included. no work on this head just the head. will come separated but all valves, springs, retainers, clips included. Just needs new valve seals and assembly. Includes cam w/ sprocket. Buy it now on Ebay for 125$!
it is not pictured but i have 4x coil on plug harnesses and coils and a universal magna flow high flow cat if any one is interested.
B16A block lots of parts are not shown but i have the entire bottom end, all is included. This includes alt, brackets, oil pump, water pump, oil pan, crank, rods and type r pistons. The cylinders on the block are good but crank i don't know about, idiot that assembled the motor (not for me) did a poor job, pretty sure the wrist pins are too big because the pistons do not turn freely. Probable cause of the bearing failure that was present when I found the motor. Pistons are still good though. Currently on Ebay or buy it now for 350$!
D16Z6 head with exhaust porting and crower stainless valves, valve springs and titanium retainers. Exhaust valves are .5mm oversized. The head flow numbers are as follows @ .400 lift:
For whatever reason it is not letting me post pics right now I will try to get them up ASAP!
intake: 190.81
Exhaust: 152.5
Improvement of about 4 on the intake and 9 on the exhaust. I will include all of the numbers from the head porter with the head. This was about a 550$ dollar job on the head. receipts for all parts and work included.
SOLD!
Crower Stage II Turbo cam .430 lift on the intake and .427 on the exhaust. Still in the box and timing card included. This was 300 new and never been used. SOLD!
D15 VTEC head, roller rocker arms included. no work on this head just the head. will come separated but all valves, springs, retainers, clips included. Just needs new valve seals and assembly. Includes cam w/ sprocket. Buy it now on Ebay for 125$!
it is not pictured but i have 4x coil on plug harnesses and coils and a universal magna flow high flow cat if any one is interested.
Last edited by HCivExoo; Jun 5, 2013 at 04:18 PM. Reason: updated
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 579
Likes: 0
From: Lawton, OK
Re: B16A / D16Z & D15 VTEC head, block, pistons and more
100 + shipping. That is all four with PR3 rods, rings are still in good condition. for whatever reason I still can't load pics on here any more. if you shoot me an email address I can send them to you that way?
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 579
Likes: 0
From: Lawton, OK
Re: B16A / D16Z & D15 VTEC head, block, pistons and more
it won't let me load pictures on honda-tech any more or else I would. give me an address and I will send them to you. Price is best offer some of these parts are on EBAY so feel free to go there and see them.
http://www.ebay.com/itm/140981938846?item=140981938846&viewitem=&vxp=mtr
http://www.ebay.com/itm/140981928280...84.m1555.l2649
If you want pictures of any of these parts PM your email and you will get pics.
http://www.ebay.com/itm/140981938846?item=140981938846&viewitem=&vxp=mtr
http://www.ebay.com/itm/140981928280...84.m1555.l2649
If you want pictures of any of these parts PM your email and you will get pics.
Trending Topics
Trial User
Joined: May 2013
Posts: 1
Likes: 0
Re: B16A / D16Z & D15 VTEC head, block, pistons and more
All prices best offer so if you are interested shoot me a price. I am needing the space and cash so unless you are really low balling me your price will probably fly. I accept pay pal only and tracking info is provided. Shipping is at buyers expense unless we work out a price shipped. I am willing to part any of these things out as well.
B16A block lots of parts are not shown but i have the entire bottom end, all is included. This includes alt, brackets, oil pump, water pump, oil pan, crank, rods and type r pistons. The cylinders on the block are good but crank i don't know about, idiot that assembled the motor (not for me) did a poor job, pretty sure the wrist pins are too big because the pistons do not turn freely. Probable cause of the bearing failure that was present when I found the motor. Pistons are still good though.
D16Z6 head with exhaust porting and crower stainless valves, valve springs and titanium retainers. Exhaust valves are .5mm oversized. The head flow numbers are as follows @ .400 lift:
For whatever reason it is not letting me post pics right now I will try to get them up ASAP!
intake: 190.81
Exhaust: 152.5
Improvement of about 4 on the intake and 9 on the exhaust. I will include all of the numbers from the head porter with the head. This was about a 550$ dollar job on the head. receipts for all parts and work included.
Crower Stage II Turbo cam .430 lift on the intake and .427 on the exhaust. Still in the box and timing card included. This was 300 new and never been used.
D15 VTEC head, roller rocker arms included. no work on this head just the head. will come separated but all valves, springs, retainers, clips included. Just needs new valve seals and assembly. Includes cam w/ sprocket.
it is not pictured but i have 4x coil on plug harnesses and coils and a universal magna flow high flow cat if any one is interested.
B16A block lots of parts are not shown but i have the entire bottom end, all is included. This includes alt, brackets, oil pump, water pump, oil pan, crank, rods and type r pistons. The cylinders on the block are good but crank i don't know about, idiot that assembled the motor (not for me) did a poor job, pretty sure the wrist pins are too big because the pistons do not turn freely. Probable cause of the bearing failure that was present when I found the motor. Pistons are still good though.
D16Z6 head with exhaust porting and crower stainless valves, valve springs and titanium retainers. Exhaust valves are .5mm oversized. The head flow numbers are as follows @ .400 lift:
For whatever reason it is not letting me post pics right now I will try to get them up ASAP!
intake: 190.81
Exhaust: 152.5
Improvement of about 4 on the intake and 9 on the exhaust. I will include all of the numbers from the head porter with the head. This was about a 550$ dollar job on the head. receipts for all parts and work included.
Crower Stage II Turbo cam .430 lift on the intake and .427 on the exhaust. Still in the box and timing card included. This was 300 new and never been used.
D15 VTEC head, roller rocker arms included. no work on this head just the head. will come separated but all valves, springs, retainers, clips included. Just needs new valve seals and assembly. Includes cam w/ sprocket.
it is not pictured but i have 4x coil on plug harnesses and coils and a universal magna flow high flow cat if any one is interested.
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 579
Likes: 0
From: Lawton, OK
Re: B16A / D16Z & D15 VTEC head, block, pistons and more
D16Z6 Head = SOLD
Crower Cam = SOLD
still have the:
D15 head (pending also on ebay)
Type R pistons & rods 100 shipped
B16 Complete w/ alt, oil pump, pan, pick up, water pump, squirters, crank, motor mounts side and rear (CRX), timing tensioner, belt, crank pulley and new seals for almost all of this. 200 + shipping
Magna flow universal cat. converter 35 shipped
Crower Cam = SOLD
still have the:
D15 head (pending also on ebay)
Type R pistons & rods 100 shipped
B16 Complete w/ alt, oil pump, pan, pick up, water pump, squirters, crank, motor mounts side and rear (CRX), timing tensioner, belt, crank pulley and new seals for almost all of this. 200 + shipping
Magna flow universal cat. converter 35 shipped
Thread
Thread Starter
Forum
Replies
Last Post
redline201
Honda Civic / Del Sol (1992 - 2000)
7
Dec 10, 2002 01:00 PM