I'm in desperate of some help just did an engine swap to my 94 accord nothing crazy just went from the stock f22b2 to the b1 and converted the trans from auto to manual but it won't start I had a donor car that I got all of my parts from including harness ecu linkage and pedal assembly can't figure it out any ideas?

 

What does the engine do when you crank it over? Just cranks but doesn't fire up? or everything just black out when you turn the key over?

 

What year is the F22B1?

If it is out of a 96-97 have you addressed the TDC & CKP sensor issue between the OBD2 engine and your OBD1 chassis?

 

The engine is a 94 same as my car I figured out why it wouldn't crank it was the starter wire off the auto shifter needed to jump it to make contact but now I have no spark in using the ecu and harness for the b1 any ideas

 

Did you connect the ground wire to the driver side of the intake mani? If it's not hooked up, your engine won't have spark.

 

Your right man that's all it was I had it on but not tight tightened it down fired right up thank you I definitely appreciate the help