so I have a b16a2 in my eg hatch. I have already don't the swap awhile back and it has been running fine. one day I was driving down the road and it just quit, I had no fuel, and I changed the fuel pump and still nothing. I ended up running a wire straight to the fuel pump from the battery and made it home. once I got him I found out that I had a bad wire from the swap under my carpet. I replaced all the wires then bingo my fuel pump was working. now I go to start it and it just turns over but like wont start. it hits a lil but wont run. I thought maybe the ecu went bad so I got another one and still the same. I got a new relay and still the same. I ended up getting a new distributer rotor button cap and plugs and its still doing the same thing. all my fuses are good I am really stumped. I checked other threads and didn't see the same problem just people running into this when they first did the swap but mine has been running. im not really sure what to do and I need some help, its been 3wks off and on I have been working at this.